172 records – page 2 of 9.

Telegraph Key

https://search.bvmuseum.com/link/artifacts493
Material
METAL/ALLOY-UNKNOWN; FABRIC-UNKNOWN; PLASTIC;
Description
An 'automatic' telegraph key with a heavy, rectangular, metal base. The bottom of the base has tripod, stubby feet and two narrow copper strips attached with screws to fittings at the top. JEP is inscribed on the side of the platform. The lever key and fittings on the top are silver-colored metal.…
Category
TOOLS AND EQUIPMENT FOR COMMUNICATION
Sub-Category
TELECOMMUNICATION TOOLS AND EQUIPMENT
Description
An 'automatic' telegraph key with a heavy, rectangular, metal base. The bottom of the base has tripod, stubby feet and two narrow copper strips attached with screws to fittings at the top. JEP is inscribed on the side of the platform. The lever key and fittings on the top are silver-colored metal. The key has a black, round, flat knob at one side, the end is a black, triangular piece on the other side. Below and to the side of this is a small lever (on/off switch?) with a cylindrical, red knob at the top. The key, which runs the length of the base is attached to a square metal holder near the font of the base. This square piece has "78" stamped at the bottom center. The key is attached to it with several different fittings. At one side is a short (approx. 60cm) length of tan, cloth-wrapped wire. The wire has a black, cylindrical grip and a pointed copper plug at one end. The other end is divided into three wires which are connected to fittings on the base.
Narrative
From previous card 'Used on the Old Telegraph line at Telegraph Creek', during 1919 - 1954, by Joe Panter. -called a 'Telegraph Bug'.
Material
METAL/ALLOY-UNKNOWN; FABRIC-UNKNOWN; PLASTIC;
Inscriptions
JEP
Height
7.4
Width
7.4
Length
20.3
Units Of Measurement
Centimeters
Accession No.
1979.153.3
Type of Record
Museum Artifact

Images

Less detail

Telegraph Key

https://search.bvmuseum.com/link/artifacts1964
Description
Oval shaped frame with rusted metal bars and a gray cord with wires exposed on each end. Black paint is chipping off from the frame, exposing the cracked metal undernearth.
Category
COMMUNICATION OBJECTS
Sub-Category
LAND TRANSPORTATION,ACCESSORY
Description
Oval shaped frame with rusted metal bars and a gray cord with wires exposed on each end. Black paint is chipping off from the frame, exposing the cracked metal undernearth.
Width
7.5
Length
13
Units Of Measurement
Centimeters
Accession No.
2005.2.1
Type of Record
Museum Artifact

Images

Less detail

Telegraph Lineman Spur

https://search.bvmuseum.com/link/artifacts1279
Material
ANIMAL - LEATHER
FABRIC-FELT;
METAL / ALLOY - UNKNOWN
Description
A spur consisting of a long, flat iron brace which is 38 cm long and ends in a U-shaped bottom. At the top of the brace a thick leather strap runs through a metal loop and is closed by a buckle. On the strap is small square pad with a felt backing and two leather loops which are riveted to the fron…
Other Names
Climbing Spur
Category
TOOLS AND EQUIPMENT FOR SCIENCE AND TECHNOLOGY
Sub-Category
MAINTENANCE TOOLS AND EQUIPMENT
Description
A spur consisting of a long, flat iron brace which is 38 cm long and ends in a U-shaped bottom. At the top of the brace a thick leather strap runs through a metal loop and is closed by a buckle. On the strap is small square pad with a felt backing and two leather loops which are riveted to the front. There is a metal loop on the one side of the U-shaped bottom and a sharp metal point on the other side.
Narrative
There are a pair of these spurs. The other one is labelled 1991.132.2
ca 1860s
History Of Use
Equipment for the construction of telegraph lines for the Dominion Telegraph system.
Material
ANIMAL - LEATHER
FABRIC-FELT;
METAL / ALLOY - UNKNOWN
Inscriptions
The back of the brace is stamped with a "4" and there is some indecipherable print near the top.
Length
47
Units Of Measurement
Centimeters
Accession No.
1991.132.1
Type of Record
Museum Artifact

Images

Less detail

Telegraph Lineman Spur

https://search.bvmuseum.com/link/artifacts3471
Material
ANIMAL - LEATHER
FABRIC-FELT;
METAL / ALLOY - UNKNOWN
Description
A spur consisting of a long, flat, iron brace which is 38 cm long and ends in a U-shaped bottom. At the top of the brace a thick leather strap runs through a metal loop and is closed by a buckle. On the strap there is a small square pad with a felt backing and a two leather loops which are riveted …
Other Names
Climbing Spur
Category
TOOLS AND EQUIPMENT FOR SCIENCE AND TECHNOLOGY
Sub-Category
MAINTENANCE TOOLS AND EQUIPMENT
Description
A spur consisting of a long, flat, iron brace which is 38 cm long and ends in a U-shaped bottom. At the top of the brace a thick leather strap runs through a metal loop and is closed by a buckle. On the strap there is a small square pad with a felt backing and a two leather loops which are riveted to the front. There is a metal loop on the one side of the U-shaped bottom and a sharp metal point on the other side.
Narrative
There are a pair of these spurs. The other one is labelled 1991.132.1
History Of Use
Equipment for the construction of telegraph lines for the Dominion Telegraph system.
Material
ANIMAL - LEATHER
FABRIC-FELT;
METAL / ALLOY - UNKNOWN
Inscriptions
The back of the brace is stamped with a "4" and there is some indecipherable print near the top.
Length
47
Units Of Measurement
Centimeters
Accession No.
1991.132.2
Type of Record
Museum Artifact

Images

Less detail

Telegraph Office and Mrs. Silver's Fashion Shoppe during Klondike Days

https://search.bvmuseum.com/link/descriptions4215
Date Range
1949
Collection
BVM visual record collection
Description Level
Item
GMD
graphic material
Scope and Content
Photo of the Telegraph Office (left) and Mrs. Silver's Fashion Shoppe (right) on Klondike Days. Fashion shop has a banner reading "[Marg's?] Panty Shanty."
Collection
BVM visual record collection
Description Level
Item
GMD
graphic material
Fonds No.
C2
Item No.
P4138
Accession No.
2000.72.1
Physical Description
1 b&w negative
Scan Resolution
300 dpi
Date Range
1949
Custodial History
Item was lent to the Bulkley Valley Museum for copying in 2000 by Rosa Langston Clowater. Original photo has been returned to donor.
Scope and Content
Photo of the Telegraph Office (left) and Mrs. Silver's Fashion Shoppe (right) on Klondike Days. Fashion shop has a banner reading "[Marg's?] Panty Shanty."
Geographic Access
Smithers, B.C.
Notes
Negative only.
Type of Record
Archival Description

Images

Less detail

Telegraph office and operator at Kwinitsa, B.C., on the Skeena River

https://search.bvmuseum.com/link/descriptions1511
Collection
BVM visual record collection
Description Level
Item
GMD
graphic material
Collection
BVM visual record collection
Description Level
Item
GMD
graphic material
Other Title Info
Title based on description written on backside of photograph.
Fonds No.
C2
Item No.
P0749
Accession No.
1982.2.1
Physical Description
1 photograph: b & w; 11 x 9cm.
History / Biographical
There were cabins every 25-30 miles on the line. Operators got $150 per month plus trapping rights to their section. The line was activated in 1901 and was washed out by flood in 1936 and much of it wasn't ever repaired.
Geographic Access
Kwinitsa, B.C.
Skeena River
Type of Record
Archival Description

Images

Less detail

The telegraph office at Tyhee Lake, Telkwa, B.C.

https://search.bvmuseum.com/link/descriptions2046
Collection
BVM visual record collection
Description Level
Item
GMD
graphic material
Collection
BVM visual record collection
Description Level
Item
GMD
graphic material
Fonds No.
C2
Item No.
P1285
Accession No.
1983.13
Physical Description
1 photograph; b&w; 10x9cm
Scan Resolution
96 dpi
Geographic Access
Tyhee Lake
Telkwa, B.C.
Notes
Negative copy also available.
Type of Record
Archival Description

Images

Less detail

Telegraph point, looking up river

https://search.bvmuseum.com/link/descriptions7083
Date Range
1904
Collection
BVM visual record collection
Description Level
Item
GMD
graphic material
Collection
BVM visual record collection
Description Level
Item
GMD
graphic material
Creator
W.R. [Hewin?]
Fonds No.
C2
Item No.
P6453
Accession No.
2018.2
Physical Description
1 photograph; b&w; 13 x 9 cm
Scan Resolution
300dpi
Date Range
1904
Type of Record
Archival Description

Images

Less detail

Telegraph Relay

https://search.bvmuseum.com/link/artifacts149
Material
METAL/ALLOY-UNKNOWN; WOOD-UNKNOWN;
Description
The telegraph relay has two metal round flat legs with holes drilled in the middle. The body is wood. Situated on top of the wood are five screw like objects with flat serrated heads. Three of those have round bodies; two have square bodies. There are two lone rectangular metal pieces with four…
Manufacturer
A Hearn & Soper Limited
Category
TOOLS AND EQUIPMENT FOR COMMUNICATION
Sub-Category
TELECOMMUNICATION TOOLS AND EQUIPMENT
Place Of Manufacture
Canada: Ottawa, Ontario
Description
The telegraph relay has two metal round flat legs with holes drilled in the middle. The body is wood. Situated on top of the wood are five screw like objects with flat serrated heads. Three of those have round bodies; two have square bodies. There are two lone rectangular metal pieces with four curves cut in each. In the middle of those, are four round metal pieces with curves cut on each side. One has a screw hole cut in the middle.
Narrative
B.V. Stories Book
History Of Use
The Telegraph line was activated in 1901 from business centres in the United States and the Southern part of the British Columbian, all the way to the Yukon gold fields. The telegraph line was completed in 1901 and ran north to Telegraph Creek on the Stikine River, onto Atlin, White Horse and Dawson City.
Material
METAL/ALLOY-UNKNOWN; WOOD-UNKNOWN;
Height
11.5
Width
8
Length
3.5
Units Of Measurement
Centimeters
Accession No.
1971.77.1
Type of Record
Museum Artifact

Images

Less detail

Telegraph Relay

https://search.bvmuseum.com/link/artifacts150
Material
WOOD-UNKNOWN;
METAL / ALLOY - UNKNOWN
PLASTIC;
Description
The telegraph has two long legs that hold the body 2.1 cm long with only one screw in one of the legs. The body of the object is 15.8cm long. The top of the object has 5 Cylinders; one is missing a round with grooved sides top. In the middle are two pieces of metal that are cut in the center so …
Manufacturer
A Hearn & Soper
Manufacturer Notes
Manufacturer previously entered as Gelley, Lou-Allen, Marty
Category
TOOLS AND EQUIPMENT FOR COMMUNICATION
Sub-Category
TELECOMMUNICATION TOOLS AND EQUIPMENT
Place Of Manufacture
Canada: Ottawa, Ontario
Period or Date Notes
1901
Description
The telegraph has two long legs that hold the body 2.1 cm long with only one screw in one of the legs. The body of the object is 15.8cm long. The top of the object has 5 Cylinders; one is missing a round with grooved sides top. In the middle are two pieces of metal that are cut in the center so that three screws can be placed. There are holes on either sides of the screw. Beside the screws is a circular metal piece (2.5cm long) that has a neck (1cm long) to connect to a smaller circular metal piece ( 1.5cm long). There are some numbers and letter subscribed in the wood but they are too faded to read. On top are two little holes that have been filled with plastic.
Narrative
Heritage Club Project, October 1, 1973 B.V. Stories, Smithers, B.C., See-Moore Printing.
Material
WOOD-UNKNOWN;
METAL / ALLOY - UNKNOWN
PLASTIC;
Height
4.6
Width
2.2
Length
15.1
Units Of Measurement
Centimeters
Accession No.
1971.77.2
Type of Record
Museum Artifact

Images

Less detail

Telegraph Relay

https://search.bvmuseum.com/link/artifacts151
Material
METAL / ALLOY - UNKNOWN
PLASTIC;
WOOD-UNKNOWN;
Description
The telegraph has two long (12.2cm) legs that lift the object 2cm high. The top is grooved on all four sides. On the top of the flat surface there are five cylinder like objects on top. One cylinder is not fully screwed down. There are two holes with plastic fillers to protect the inside. The m…
Manufacturer
A Hearn & Soper
Manufacturer Notes
previously entered as GELLEY,LOU-ALLEN,MARTY
Category
TOOLS AND EQUIPMENT FOR COMMUNICATION
Sub-Category
TELECOMMUNICATION TOOLS AND EQUIPMENT
Place Of Manufacture
Canada: Ottawa, Ontario
Period or Date Notes
1901
Description
The telegraph has two long (12.2cm) legs that lift the object 2cm high. The top is grooved on all four sides. On the top of the flat surface there are five cylinder like objects on top. One cylinder is not fully screwed down. There are two holes with plastic fillers to protect the inside. The middle has three bigger flat with grooves on each side of the screws. There are two flat pieces of metal protecting the screws. There is writing in the wood but it is to difficult to see.
Narrative
Heritage Club Project, October 1, 1973 B.V. Stories, Smithers, B.C. See-Moore Printing.
Material
METAL / ALLOY - UNKNOWN
PLASTIC;
WOOD-UNKNOWN;
Height
4.6
Width
2.2
Length
15.1
Units Of Measurement
Centimeters
Accession No.
1971.77.3
Type of Record
Museum Artifact

Images

Less detail

Telegraph Relay

https://search.bvmuseum.com/link/artifacts152
Material
METAL/ALLOY-UNKNOWN; WOOD-UNKNOWN;
Description
The bottom is made out of metal. The longer sides are 19cm long. The two end pieces have a hole in the centre of the metal. They are approx. 10cm long. The second layer is made out of wood, it is grooved just like the metal. Two of the sides are 18.5 cm. The two shorter sides are approx. 9.5 c…
Manufacturer
A Hearn & Soper LImited
Manufacturer Notes
previously entered as Gelley, Lou-Allen, Marty, Ottawa Ontario
Category
TOOLS AND EQUIPMENT FOR COMMUNICATION
Sub-Category
TELECOMMUNICATION TOOLS AND EQUIPMENT
Place Of Manufacture
Canada: Ottawa, Ontario
Period or Date Notes
1901
Description
The bottom is made out of metal. The longer sides are 19cm long. The two end pieces have a hole in the centre of the metal. They are approx. 10cm long. The second layer is made out of wood, it is grooved just like the metal. Two of the sides are 18.5 cm. The two shorter sides are approx. 9.5 cm long. On top there are different shaped metal objects. In the middle on top there is a flat piece of metal connected to a hexagon shaped metal with two big holes cut out of it. There is a piece sticking out of the hexagon piece with a place to inset a screw. On one of the sides of the object there is a piece of metal plate screwed to the wood with writing on it. The only writing that is visible is "Ottawa, Ontario". On the side of that is two metal objects with flat heads and round thick bodies. Across from those is a metal object with a flat head, round thick middle with a long stem like body. On the other side of the hexagon there are two metal pieces with holes that come out of the wood. There's two holes drilled into the wood and a metal round thick body on a coiled object. Metal Plate on top reads A HEARN & SOPER LIMITED OTTAWA ONTARIO
Narrative
Heritage Club Project, October 1, 1973 B.V. Stories, Smithers B.C., See-Moore Printing.
Material
METAL/ALLOY-UNKNOWN; WOOD-UNKNOWN;
Height
20.5
Width
3
Length
12
Units Of Measurement
Centimeters
Accession No.
1971.77.4
Type of Record
Museum Artifact

Images

Less detail

Telegraph Set: Sounder, Key, and Microvolt Reader

https://search.bvmuseum.com/link/artifacts3127
Description
The set is composed of three firmly attached parts. Sounder: Function currently unknown. Has a black metal bottom, and screwed into the bottom is a brass metal plate. It has various metal parts. Key: attached to the top of the kit. It is made of brass metal and has a lever and a tapper. It still …
Category
COMMUNICATION OBJECTS
Sub-Category
TELECOMMUNICATION TOOLS AND EQUIPMENT
Description
The set is composed of three firmly attached parts. Sounder: Function currently unknown. Has a black metal bottom, and screwed into the bottom is a brass metal plate. It has various metal parts. Key: attached to the top of the kit. It is made of brass metal and has a lever and a tapper. It still works. Manufactured by Western Electric. Microvolt Reader: attached to the front of the kit. It is made by Weston Electric Inst. Corp. Model 269. Made of black metal with a white reader that goes from 100 to both sides, with a small black arrow to indicate what volt it is. Manufactured in Newark, New Jersey. Kit has two long, braided wires coming from the base.
Accession No.
2013.27.1
Type of Record
Museum Artifact

Images

Less detail

Yukon telegraph line

https://search.bvmuseum.com/link/descriptions5347
Date Range
1925; 1930-1935
Collection
Department of Public Works fonds
Description Level
Sub-series
GMD
textual record
Scope and Content
Series includes inventories, requisitions and work reports written by Charles P Janze, John Jensen and William Blackstock.
Collection
Department of Public Works fonds
Description Level
Sub-series
GMD
textual record
Fonds No.
GF1
Series No.
SS1
Accession No.
1983.68
1990.169
Physical Description
3.5 cm of textual records
Date Range
1925; 1930-1935
History / Biographical
As a result of the Klondike Gold Rush, the Yukon Telegraph Line was established to link the rest of Canada with the Yukon. The Line was an overland telegraph operated by the Dominion Government of Canada from 1901 and 1936. Telegraph service previously existed up to Hazelton with the Collin’s Overland Telegraph (1866), which was built by the Western Union Telegraph in hopes of linking Europe and Canada via the Bering Strait and Russia. However, with the Transatlantic Telegraph Line was completed first, construction on the Collin’s Overland Telegraph was halted just north of Hazelton. In 1899 or 1900, the Dominion Government of Canada began construction north of Hazelton (which at the time was undeveloped and remote), using a combination of old Collin’s Overland Telegraph surveys, First Nations trails and the Ashcroft Trail. In 1901 the telegraph began operation, employing one lineman and one operator at each station cabin along the route. There were nine main cabins along the route numbered 1 to 9. Beyond the Ninth Cabin, the stations were named based on nearby geographical features, such as Echo Lake or Iskut River. In between each “home stations” were refuge cabins, referred to by distance from the main cabins in the reports by linemen. Most of the records held by the Archives pertain to the Eighth Cabin, of which Charles Philip Janze maintained the northern lines and John Jensen serviced the southern portions of telegraph line. William Blackstock most likely maintained the Ninth Cabin and its surrounding lines. Unfortunately, in 1936, substantial flooding severely damaged sections of the telegraph line and supporting infrastructure, and with the emergence of new wireless radio technology, the Dominion Government could not justify spending the money for repairs and the Yukon Telegraph Line was permanently shut down.
Scope and Content
Series includes inventories, requisitions and work reports written by Charles P Janze, John Jensen and William Blackstock.
Type of Record
Archival Description
Less detail

Sign

https://search.bvmuseum.com/link/artifacts506
Description
Wooden sign that reads: "Dominion Government Telegraphs" in black paint, with a wavy line beneath.
Title
Dominion Government Telegraphs sign
Other Names
Wooden sign
Category
COMMUNICATION OBJECTS
Sub-Category
DOCUMENTARY OBJECT
Place Used
According to the donation sheet this sign was from the first telegraph office in Smithers. The operator was Bob Barker in 1914.
Period or Date Notes
late 1800s
Description
Wooden sign that reads: "Dominion Government Telegraphs" in black paint, with a wavy line beneath.
Narrative
ca 1890s
History Of Use
Sign from circa 1890s for the Dominion Telegraph system. The donor`s father, Les Buchanan worked for the Dominion Telegraph. Found during the dig of the highway building in 1979. The sign was done with old grease pencil. This rubs off like charcoal.
Accession No.
1979.154.1
Type of Record
Museum Artifact

Images

Less detail

Telephone

https://search.bvmuseum.com/link/artifacts783
Material
METAL/ALLOY-UNKNOWN; PLASTIC; FABRIC-UNKNOWN; PAPER-CARDBOARD;
Description
The telephone is inside of the Black box possibly from G.T.P. SM. 10.70 engraved on both sides and top of box. Hinge lid (attached). Inside: Black phone with attached cord. Bells attached on both sides of the box. On one side the bell is missing.
Other Names
Telegraph phone
Category
TOOLS AND EQUIPMENT FOR COMMUNICATION
Sub-Category
TELECOMMUNICATION TOOLS AND EQUIPMENT
Description
The telephone is inside of the Black box possibly from G.T.P. SM. 10.70 engraved on both sides and top of box. Hinge lid (attached). Inside: Black phone with attached cord. Bells attached on both sides of the box. On one side the bell is missing.
History Of Use
Used to test telegraph wires or lines
Material
METAL/ALLOY-UNKNOWN; PLASTIC; FABRIC-UNKNOWN; PAPER-CARDBOARD;
Height
20
Width
11.6
Length
26.5
Units Of Measurement
Centimeters
Accession No.
1986.25.1
Type of Record
Museum Artifact

Images

Less detail

Voltage Gauge

https://search.bvmuseum.com/link/artifacts1965
Description
Hand-held Volt-Ammeter that measures volts and amps. Attached is a leather cord. Some scratches on the glass.
Other Names
Telegraph Key
Category
COMMUNICATION OBJECTS
Sub-Category
LAND TRANSPORTATION,ACCESSORY
Place Of Manufacture
United States
Description
Hand-held Volt-Ammeter that measures volts and amps. Attached is a leather cord. Some scratches on the glass.
Diameter
5
Circumference
18
Units Of Measurement
Centimeters
Accession No.
2005.2.2
Type of Record
Museum Artifact

Images

Less detail

Publications

https://search.bvmuseum.com/link/descriptions8588
Date Range
2008-2022
Collection
Harry Kruisselbrink fonds
Description Level
Series
GMD
textual record
electronic record
Scope and Content
Series contains writings published by Harry Kruisselbrink including Smithers: A Railroad Town (2008), Smithers: A Railroad Town (2012) including a dedicated copy and a digital copy, Beyond the Call of Duty: The Adventurous Life of Rev. F.L. Stephenson (2019), and Alpine Al: The Smithers Man (2022).
Collection
Harry Kruisselbrink fonds
Description Level
Series
GMD
textual record
electronic record
Creator
Harry Kruisselbrink
Fonds No.
PF32
Series No.
S2
Accession No.
2019.33
2022.5
2023.23
Date Range
2008-2022
Scope and Content
Series contains writings published by Harry Kruisselbrink including Smithers: A Railroad Town (2008), Smithers: A Railroad Town (2012) including a dedicated copy and a digital copy, Beyond the Call of Duty: The Adventurous Life of Rev. F.L. Stephenson (2019), and Alpine Al: The Smithers Man (2022).
Subject Access
Bulkley River
Grand Trunk Pacific Railway
Yukon Telegraph Line
Geographic Access
Smithers, B.C.
Type of Record
Archival Description
Less detail

Insulator

https://search.bvmuseum.com/link/artifacts3287
Description
Piece of aqua-blue Collins insulator.
Title
Collins Telegraph Insulator
Category
TOOLS AND EQUIPMENT FOR SCIENCE AND TECHNOLOGY
Sub-Category
ELECTRICAL AND MAGNETIC TOOLS AND EQUIPMENT
Start Date
1865
End Date
1867
Description
Piece of aqua-blue Collins insulator.
Narrative
From the Kispiox area
History Of Use
Insulators kept the wires linking telegraphs insulated from the wooden poles that held them aloft. Insulators can be dated by looking at material that they are made of, and how they were manufactured. The earliest insulators were made of glass, and were first made in the 1840s. Threaded glass insulators were patented in 1865 as a means of more securely fastening the glass to the wood pins (like a bottle and its cap). Porcelain and ceramic insulators, which were found to have superior protective properties, came into use in the late 1800s.
Cultural Context
The Russian–American Telegraph, also known as the Western Union Telegraph Expedition and the Collins Overland Telegraph, was an undertaking by the Western Union Telegraph Company in 1865–1867, to lay an electric telegraph line from San Francisco, California to Moscow, Russia. The route was intended to travel from California via Oregon, Washington Territory, the Colony of British Columbia and Russian America, under the Bering Sea and across Siberia to Moscow, where lines would communicate with the rest of Europe. It was proposed as an alternate to long, deep underwater cables in the Atlantic. The line was abandoned in 1867. Source: Wikipedia
Accession No.
1986.14.1
Type of Record
Museum Artifact

Images

Less detail

Insulator

https://search.bvmuseum.com/link/artifacts3797
Description
A rubber telegraph insulator. It has a cylinder-like body, ending in a dome top. Between the cylinder body and the dome head is an groove measuring approx. 1.5 cm in width. See http://www.collectinginsulators.com/Rubber/Rubber.html for more information, including: "Few references contain informat…
Title
Continental Rubber Works Rubber Telegraph Insulator
Manufacturer
Contiental Rubber Works
Category
TOOLS AND EQUIPMENT FOR SCIENCE AND TECHNOLOGY
Sub-Category
ELECTRICAL AND MAGNETIC TOOLS AND EQUIPMENT
Place Of Manufacture
United States: Erie, Pennsylvania
Description
A rubber telegraph insulator. It has a cylinder-like body, ending in a dome top. Between the cylinder body and the dome head is an groove measuring approx. 1.5 cm in width. See http://www.collectinginsulators.com/Rubber/Rubber.html for more information, including: "Few references contain information on rubber insulators. Gerald Brown's book on nonglass/nonporcelain insulators is probably the lone exception, however, this was published many years ago and is out of print. Even then, there was only surface coverage of the various markings on rubber insulators There are several reasons for the lack of interest in rubber insulators: Limited number of styles. Continental Rubber Works catalog four styles of rubber insulators: The R-3, R-4, R-5 and RC-1. An unmarked, unattributed slot-topped rubber insulator can also be commonly found. Some early hard rubber pin-type insulators made around 1861 exist and ruber was used in making several styles of hooks. This brings the number of styles to around a dozen Boring colors. It is no wonder that glass insulators are so popular with their range of colors that can be backlit. Rubber insulators, on the other hand, are exclusively black. Excessive supply. Continental Rubber Works made 50,000 rubber insulators per year in the 1970s with production probably extending back to the early 1940s. Since these are more recent insulators, they tend to be the ones still on the poles when they the poles came down rather than being the ones that were carted away to the landfill years ago as some newer style replaced them. The exception to this is the earlier hard rubber and hook styles which are rare. There are two groups of patents that are relevant to rubber insulators: Patents by Nelson and Charles Goodyear on the process of making rubber. These include patents #3,461, #3,462, #3,633, #4,005, #4,099, #8,075 issued May 6, 1851 and #25,111. The May 6, 1851 date has been found on a hard rubber hat style insulator. Patents assigned to The Western Union Telegraph Company under which Continental Rubber manufactured their insulators. These patents include #2,218,497 issued October 15, 1940, #2,304,483 issued December 8, 1942, and #3,061,667 issued October 30, 1962."Using this website, one can see that 5-B molds were associated with patent number 2304483.
Inscriptions
"5 - B" is on the dome end of the insulator, just above the groove.
Height
10
Circumference
19
Units Of Measurement
Centimeters
Dimension Notes
Both measures approximate.
Accession No.
2017.66.1
Type of Record
Museum Artifact

Images

Less detail

172 records – page 2 of 9.