Scope Jack

$48.00

Description

 

Use the Fix It Sticks Scope Jack to quickly and easily level your scope to your NATO or Pic rail.

Using the level is easy: simply mount the Scope Jack to your rifle's NATO or Pic rail, under your scope. Turn the Scope Jack drive handle (the Scope Jack works with any 1/4" driver) until the lifting arm engages with the flat section of the scope under its turrets. Once the scope is level, maintain pressure to keep scope level while tightening your ring screws.

In cases of minimal clearance, it may be necessary to remove the thumb screw and clamp, then slide the Scope Jack onto the rail from the side and reassemble.

Requirements:

Needs a minimum of 1/4" clearance between rail and scope bottom. 


• Works on any scope with a flat section under the turrets.

• The NATO/Pic rail must be accessible under the optic.

• Will not work with one piece mounts.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

INSTRUCTION MANUAL


Portable

Don’t drag large, single-use tools into the field. Bring The Works to build what you need on the spot and tackle nearly anything.

Precision

With tools like our Individual Torque Limiters or All-in-One Torque Driver, you can work with incredible precision on the fly. 

Performance

Made from the highest-quality materials and machined to fit each other precisely, parts are even magnetized to lock securely in place.

ABOUT FIX IT STICKS

BORN PROBLEM SOLVERS

You might be surprised to learn Fix It Sticks are conceived and designed in Chicago, Illinois. Discover the intensely curious people and the ingenious philosophy behind these slightly addictive little tools.