How to Diagnose a Computer Problem

Co-authored by Luigi Oppido and Travis Boylls

Last Updated: January 14, 2021

Many people are faced with computer problems every day. Some computer problems are easy to fix, but might go undiagnosed. This wikiHow teaches you how to diagnose common computer problems on a Windows Computer.

Steps

Download Article

This is especially important if you recently upgraded your computer. Open your computer and make sure that all the cables, RAM chips, the video card, sound card, network card, and other components are all securely attached to the motherboard.^{[1]
X
Expert Source

Luigi Oppido
Computer & Tech Specialist

Expert Interview. 31 July 2019.}
2
Check the POST. POST stands for "Power On Self Test". This is part of a computer's startup program that is used to diagnose the keyboard, random access memory (RAM), disk drives and other hardware to make sure they are working properly. If the POST detects any errors in the hardware, it will either display a text error message on the screen or a series of short and long beeps.
- If an error message appears as you boot your computer, type the exact error message into a Google search to find more information about the error. Use your mobile phone or another computer, if needed. If you hear a series of beeps as your computer starts up, make a note of the pattern and visit https://www.computerhope.com/beep.htm to see what error the pattern indicates.^{[2]
  X
  Research source}
Advertisement
The time it takes for an operating system to load when a computer boots up greatly depends on the hardware of the computer is running. If you notice your operating system takes significantly longer to load than it used to, this may indicate a problem with your hard drive that is preventing your computer from retrieving information from your hard drive.
If your computer is able to boot properly, but you notice graphics problems, this may indicate driver failures or hardware failures with graphics cards. If you suspect there might be a problem with your graphics card, you should first update your graphics card drivers. If the problem still persists, you can download software to test your graphics card.
5
Check for hardware problems. Many computer problems are caused by hardware failures or problems with hardware drivers. Windows will usually notify you about devices that have a problem. You can also use Device Manager to check the status of different hardware devices. Double-click a category in the Device Manager to display all devices in that category. Then double-click a specific device. Any errors with the device will be displayed in the "Device Status" box under the "General" tab. Check all devices. Use the following steps to open the Device Manager:
- Click the Windows Start menu in the lower-left corner.
- Type Control Panel.
- Double-click the Control Panel in the Windows Start menu.
- Click Hardware and Sound.
- Click Device Manager below "Devices and Printers".
Some software may require more resources than the system can provide. Chances are that if a problem begins after software starts, the software is causing it. If the problem appears directly upon startup, it may be caused by software that starts automatically on boot. Uninstall any recently installed programs and see if the problem continues. You may also want to limit the number of startup programs.
7
Check the RAM and CPU consumption. If your computer is choppy or running slow, it is good practice to see if a program is consuming more resources than the computer can provide. An easy way to check this is to use the Task Manager, right-click on the taskbar at the bottom of the screen and click Task Manager. Click the Processes tab. Click CPU to display a graph of the current CPU usage. Click Memory to see a graph of the RAM consumption.
- If your computer CPU graph is running at 80%-100% most of the time, you may be able to upgrade your computer processor.
- If your computer is using too much memory, close all unneeded programs and browser tabs and see if your computer's performance improves. Limit the amount of multi-tasking you do on your computer. If your computer doesn't have enough memory to do basic operations, some computers allow you to purchase and install more RAM.
8
Listen to the computer. If the hard drive is scratching or making loud noises, shut off the computer and have a professional diagnose the hard drive. Also, listen to the CPU fan. If the fan is blowing hard, this could mean that your CPU is getting too hot because it is working too hard.
- If you suspect you have a damaged hard drive, be sure to backup all important data from the drive immediately and shutdown your computer. Each time you boot up a computer with a damaged hard drive, it will damage the hard drive further. If you are unable to backup your data, remove your hard drive and take it to a professional for data recovery.
Run a virus and malware scan. Performance problems can be caused by malware on the computer. Running a virus scan can unearth any problems. Use a trusted antivirus program that is frequently updated, such as Norton, McAfee, or Malwarebytes.^{[3]
X
Expert Source

Luigi Oppido
Computer & Tech Specialist

Expert Interview. 31 July 2019.}
Check for the problem in safe mode. As a last-ditch effort, check the problem in safe mode. If the problem persists in safe mode, it is a fair bet that the operating system itself is to blame. You may need to Reinstall Windows.

Expert Q&A

Search

Add New Question

Question

How do I figure out if my power supply is bad?

Luigi Oppido
Computer & Tech Specialist
Luigi Oppido is the Owner and Operator of Pleasure Point Computers in Santa Cruz, California. Luigi has over 25 years of experience in general computer repair, data recovery, virus removal, and upgrades. He is also the host of the Computer Man Show! broadcasted on KSQD covering central California for over two years.

Luigi Oppido

Computer & Tech Specialist

Expert Answer

Take the side of your desktop case off and take out the physical power connector. Test the power supply using the connector. The power supply is going to be routing 3, 5 or 12 volts, through the board, so just check to make sure the it's supplying the proper voltage. If it isn't, something is off.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 2
Question

How do I know if my RAM is working properly?

Luigi Oppido
Computer & Tech Specialist
Luigi Oppido is the Owner and Operator of Pleasure Point Computers in Santa Cruz, California. Luigi has over 25 years of experience in general computer repair, data recovery, virus removal, and upgrades. He is also the host of the Computer Man Show! broadcasted on KSQD covering central California for over two years.

Luigi Oppido

Computer & Tech Specialist

Expert Answer

Try reseeding it in a different plug if it's separate from the motherboard. That way you can figure out if the card is bad or if there's a problem somewhere else.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 2
Question

What does it mean if the computer turns on, but nothing shows on the monitor?

Community Answer

You might have a problem with the graphics card or monitor. It could be a hardware problem or just a driver issue. Consult a tech support specialist to remedy this.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 17 Helpful 31

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

If you do not feel comfortable diagnosing or repairing a computer problem, it is best to take the computer to a certified technician and have it repaired for a moderate fee.

Thanks
Helpful 8 Not Helpful 8
These procedures will begin to narrow down common problems, but to find a specific problem, tools or specialized techniques may need to be used.

Thanks
Helpful 5 Not Helpful 4

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Always consult a competent computer technician, whether you are going to do the troubleshooting on your own or under supervision.

Thanks
Helpful 2 Not Helpful 0
Do not attempt to repair problems unless you are sure you know what you are doing

Thanks
Helpful 1 Not Helpful 0