Markup Validation Service
Check the markup (HTML, XHTML, …) of Web documents
Markup Validation Service
Check the markup (HTML, XHTML, …) of Web documents
The following notes and warnings highlight missing or conflicting information which caused the validator to perform some guesswork prior to validation, or other things affecting the output below. If the guess or fallback is incorrect, it could make validation results entirely incoherent. It is highly recommended to check these potential issues, and, if necessary, fix them and re-validate the document.
DOCTYPE Override in effect!
The detected DOCTYPE Declaration
"<!DOCTYPE html>" has been
suppressed and the DOCTYPE for
"HTML 4.01 Transitional" inserted instead,
but even if no errors are shown below the document will not be Valid
until you update it to reflect this new DOCTYPE.
Line 16,
Column 15:
there is no attribute "CHARSET"
<meta charset="utf-8">You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 16,
Column 22:
required attribute "CONTENT" not specified
<meta charset="utf-8">The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 17,
Column 53:
NET-enabling start-tag requires SHORTTAG YES
<meta http-equiv="X-UA-Compatible" content="IE=Edge"/>
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
Line 17,
Column 54:
character data is not allowed here
<meta http-equiv="X-UA-Compatible" content="IE=Edge"/>You have used character data somewhere it is not permitted to appear. Mistakes that can cause this error include:
Line 18,
Column 56:
there is no attribute "DATA-NAME"
…cation-name" content="JIRA" data-name="jira" data-version="9.12.18"><meta name…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 18,
Column 76:
there is no attribute "DATA-VERSION"
…="JIRA" data-name="jira" data-version="9.12.18"><meta name="ajs-server-scheme"…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 54,
Column 10:
there is no attribute "ID"
<meta id="atlassian-token" name="atlassian-token" content="AKVY-YUFR-9LM7-97AB_…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 92,
Column 22:
there is no attribute "DATA-WRM-KEY"
<script data-wrm-key="flush-app-header-early-inline-resources,com.atlassian.plu…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 92,
Column 219:
there is no attribute "DATA-WRM-BATCH-TYPE"
…e-phase-checkpoint-init" data-wrm-batch-type="context" data-initially-rendered>You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 92,
Column 252:
"DATA-INITIALLY-RENDERED" is not a member of a group specified for any attribute
…e-phase-checkpoint-init" data-wrm-batch-type="context" data-initially-rendered>…e-phase-checkpoint-init" data-wrm-batch-type="context" data-initially-rendered>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 98,
Column 8:
required attribute "TYPE" not specified
<script>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 104,
Column 307:
"DATA-INITIALLY-RENDERED" is not a member of a group specified for any attribute
…vent-deferrer" data-wrm-batch-type="resource" data-initially-rendered></script>…vent-deferrer" data-wrm-batch-type="resource" data-initially-rendered></script>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 105,
Column 8:
required attribute "TYPE" not specified
<script>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 128,
Column 452:
there is no attribute "DATA-WRM-KEY"
…h.css?relative-url=true" data-wrm-key="_super,-flush-app-header-early-inline-r…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 128,
Column 693:
there is no attribute "DATA-WRM-BATCH-TYPE"
…rces:resource-phase-checkpoint-init" data-wrm-batch-type="context" media="all">You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 131,
Column 704:
"DATA-INITIALLY-RENDERED" is not a member of a group specified for any attribute
…int-init" data-wrm-batch-type="context" data-initially-rendered defer></script>…int-init" data-wrm-batch-type="context" data-initially-rendered defer></script>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 132,
Column 496:
"DATA-INITIALLY-RENDERED" is not a member of a group specified for any attribute
…,-_super" data-wrm-batch-type="context" data-initially-rendered defer></script>…,-_super" data-wrm-batch-type="context" data-initially-rendered defer></script>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 133,
Column 304:
"DATA-INITIALLY-RENDERED" is not a member of a group specified for any attribute
…,-_super" data-wrm-batch-type="context" data-initially-rendered defer></script>…,-_super" data-wrm-batch-type="context" data-initially-rendered defer></script>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 134,
Column 308:
"DATA-INITIALLY-RENDERED" is not a member of a group specified for any attribute
…,-_super" data-wrm-batch-type="context" data-initially-rendered defer></script>…,-_super" data-wrm-batch-type="context" data-initially-rendered defer></script>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 135,
Column 299:
"DATA-INITIALLY-RENDERED" is not a member of a group specified for any attribute
…ndar-en" data-wrm-batch-type="resource" data-initially-rendered defer></script>…ndar-en" data-wrm-batch-type="resource" data-initially-rendered defer></script>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 136,
Column 350:
"DATA-INITIALLY-RENDERED" is not a member of a group specified for any attribute
…-moment" data-wrm-batch-type="resource" data-initially-rendered defer></script>…-moment" data-wrm-batch-type="resource" data-initially-rendered defer></script>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 150,
Column 133:
NET-enabling start-tag requires SHORTTAG YES
…pe="application/opensearchdescription+xml" href="/osd.jsp" title="Loading..."/>
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
Line 153,
Column 7:
end tag for element "HEAD" which is not open
</head>The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
Line 154,
Column 53:
document type does not allow element "BODY" here
<body id="jira" class="aui-layout aui-theme-default">The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
Line 158,
Column 29:
there is no attribute "ELEMENTTIMING"
<span elementtiming="app-header-skeleton"> </span>You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 159,
Column 16:
required attribute "TYPE" not specified
<script>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 162,
Column 17:
there is no attribute "ID"
<svg id="jira_app_header_skeleton" class="aui-header-primary" width="10…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 162,
Column 50:
there is no attribute "CLASS"
…g id="jira_app_header_skeleton" class="aui-header-primary" width="100%" height…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 162,
Column 77:
there is no attribute "WIDTH"
…ton" class="aui-header-primary" width="100%" height="40" xmlns="http://www.w3.…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 162,
Column 91:
there is no attribute "HEIGHT"
…ui-header-primary" width="100%" height="40" xmlns="http://www.w3.org/2000/svg">You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 162,
Column 102:
there is no attribute "XMLNS"
…ui-header-primary" width="100%" height="40" xmlns="http://www.w3.org/2000/svg">You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 162,
Column 130:
element "SVG" undefined
…ui-header-primary" width="100%" height="40" xmlns="http://www.w3.org/2000/svg">You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
Line 163,
Column 11:
required attribute "TYPE" not specified
<style>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 178,
Column 8:
required attribute "TYPE" not specified
<script>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 188,
Column 12:
required attribute "TYPE" not specified
<script>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 191,
Column 16:
there is no attribute "ID"
<header id="header" role="banner">You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 191,
Column 30:
there is no attribute "ROLE"
<header id="header" role="banner">You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 191,
Column 38:
element "HEADER" undefined
<header id="header" role="banner">You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
Line 209,
Column 229:
there is no attribute "CLASS"
…idebar">Skip to sidebar</a><nav class="aui-header aui-dropdown2-trigger-group"…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 209,
Column 281:
there is no attribute "ARIA-LABEL"
…i-dropdown2-trigger-group" aria-label="Site"><div class="aui-header-inner"><di…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 209,
Column 287:
element "NAV" undefined
…down2-trigger-group" aria-label="Site"><div class="aui-header-inner"><div clas…You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
Line 209,
Column 455:
there is no attribute "ARIA-CONTROLS"
…own2-trigger-arrowless" aria-controls="app-switcher" aria-haspopup="true" role…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 209,
Column 484:
there is no attribute "ARIA-HASPOPUP"
…controls="app-switcher" aria-haspopup="true" role="button" data-aui-trigger hr…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 209,
Column 496:
there is no attribute "ROLE"
…p-switcher" aria-haspopup="true" role="button" data-aui-trigger href="#app-swi…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 209,
Column 522:
"DATA-AUI-TRIGGER" is not a member of a group specified for any attribute
…"true" role="button" data-aui-trigger href="#app-switcher"><span class="aui-ic……" role="button" data-aui-trigger href="#app-switcher"><span class="aui-icon au…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 209,
Column 709:
there is no attribute "ROLE"
…aui-dropdown2 aui-style-default" role="menu" hidden data-is-user-admin="false"…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 209,
Column 723:
"HIDDEN" is not a member of a group specified for any attribute
…aui-style-default" role="menu" hidden data-is-user-admin="false" data-is-switc……role="menu" hidden data-is-user-admin="false" data-is-switcher="true"><div cla…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 209,
Column 767:
there is no attribute "DATA-IS-SWITCHER"
…s-user-admin="false" data-is-switcher="true"><div class="app-switcher-loading"…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 209,
Column 1007:
there is no attribute "ARIA-LABEL"
…om/secure/MyJiraHome.jspa" aria-label="Go to home page"><img src="/s/umaxbr/91…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 209,
Column 1149:
NET-enabling start-tag requires SHORTTAG YES
…ure requests for Atlassian products." /></a></span><ul class='aui-nav'><li><a …
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
Line 209,
Column 1194:
there is no attribute "ROLE"
…/span><ul class='aui-nav'><li><a role="button" href="/secure/Dashboard.jspa" c…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 209,
Column 1326:
there is no attribute "ARIA-HASPOPUP"
…n2-ajax" id="home_link" aria-haspopup="true" aria-controls="home_link-content"…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 209,
Column 1347:
there is no attribute "ARIA-CONTROLS"
…k" aria-haspopup="true" aria-controls="home_link-content" title="View and mana…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 209,
Column 1435:
there is no attribute "ELEMENTTIMING"
…shboards" accesskey="d" elementtiming="app-header" data-aui-extra-classes>Dash…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 209,
Column 1470:
"DATA-AUI-EXTRA-CLASSES" is not a member of a group specified for any attribute
…ng="app-header" data-aui-extra-classes>Dashboards</a><div class="aui-dropdown2……-content" data-aui-dropdown2-ajax-key="home_link"></div></li><li><a role="butt…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 209,
Column 1893:
"DATA-AUI-EXTRA-CLASSES" is not a member of a group specified for any attribute
…" accesskey="p" data-aui-extra-classes>Projects</a><div class="aui-dropdown2 a……" accesskey="i" data-aui-extra-classes>Issues</a><div class="aui-dropdown2 aui……jax-key="find_link"></div></li><script>performance.mark("app-header");</script…The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 209,
Column 2422:
document type does not allow element "SCRIPT" here; assuming missing "LI" start-tag
…jax-key="find_link"></div></li><script>performance.mark("app-header");</script……input id="quickSearchInput" aria-live="polite" role="searchbox" autocomplete="…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 213,
Column 62:
there is no attribute "ROLE"
…kSearchInput" aria-live="polite" role="searchbox" autocomplete="off" class="s…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 213,
Column 87:
there is no attribute "AUTOCOMPLETE"
…polite" role="searchbox" autocomplete="off" class="search" type="text" title=…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 213,
Column 148:
there is no attribute "PLACEHOLDER"
…ype="text" title="Search" placeholder="Search" name="searchString" accessKey="…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 213,
Column 191:
NET-enabling start-tag requires SHORTTAG YES
…"text" title="Search" placeholder="Search" name="searchString" accessKey="q" />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
Line 227,
Column 22:
there is no attribute "ARIA-OWNS"
aria-owns="system-help-menu-content"You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 268,
Column 58:
element "AUI-HEADER-END" undefined
…-- .aui-header-inner--><aui-header-end></aui-header-end></nav><!-- .aui-header…You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
Line 274,
Column 13:
there is no attribute "ID"
<section id="announcement-banner" class="alertHeader" aria-label="Announcement …You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 274,
Column 41:
there is no attribute "CLASS"
…ection id="announcement-banner" class="alertHeader" aria-label="Announcement b…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 274,
Column 66:
there is no attribute "ARIA-LABEL"
…ment-banner" class="alertHeader" aria-label="Announcement banner" tabindex="0">You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 274,
Column 97:
there is no attribute "TABINDEX"
…ment-banner" class="alertHeader" aria-label="Announcement banner" tabindex="0">You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 274,
Column 100:
element "SECTION" undefined
…ment-banner" class="alertHeader" aria-label="Announcement banner" tabindex="0">You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
Line 347,
Column 15:
there is no attribute "DATA-DOMAIN"
data-domain="ed42d30f-c9f0-408c-b65a-cd77205ecdf5"You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 348,
Column 13:
there is no attribute "DATA-TEST"
data-test="false"You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 349,
Column 17:
there is no attribute "DATA-GEOFENCE"
data-geofence="true"You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 350,
Column 13:
there is no attribute "DATA-SYNC"
data-sync="false"You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 355,
Column 8:
required attribute "TYPE" not specified
<script>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 356,
Column 109:
end tag for element "STRONG" which is not open
…-error-icon-color);">Reminder:</strong> Updating UPM <strong>will</strong> cau…The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
Line 356,
Column 144:
end tag for element "STRONG" which is not open
…trong> Updating UPM <strong>will</strong> cause a 5-10 minute service outage!';The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
Line 385,
Column 8:
required attribute "TYPE" not specified
<script>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 386,
Column 102:
end tag for element "STRONG" which is not open
…-error-icon-color);">Reminder:</strong> attachments on JAC are publicly access…The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
Line 386,
Column 189:
end tag for element "EM" which is not open
…are publicly accessible, even those shared within <em>internal</em> comments.';The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
Line 396,
Column 60:
end tag for "SCRIPT" omitted, but its declaration does not permit this
$('#addcomment').prepend(`<div>${piiWarningHtml}</div>`);
The next message, "start tag was here"
points to the particular instance of the tag in question); the
positional indicator points to where the validator expected you to close the
tag.
Line 385,
Column 1:
start tag was here
<script> $('head').append('<style>.aui-toolbar2 .aui-icon.aui-iconfont-file-generi…The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 398,
Column 31:
document type does not allow element "STYLE" here
$('head').append('<style>.aui-toolbar2 .aui-icon.aui-iconfont-file-generi…The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
Line 405,
Column 9:
end tag for element "SCRIPT" which is not open
</script>The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
Line 412,
Column 10:
end tag for element "SECTION" which is not open
</section>The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
Line 416,
Column 14:
there is no attribute "ID"
<template id="head-content-tmp-0"><meta name="ajs-dashboard-id" content="10440"…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 416,
Column 34:
element "TEMPLATE" undefined
<template id="head-content-tmp-0"><meta name="ajs-dashboard-id" content="10440"…You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
Line 416,
Column 80:
NET-enabling start-tag requires SHORTTAG YES
…ntent-tmp-0"><meta name="ajs-dashboard-id" content="10440"/></template><script>
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
Line 416,
Column 100:
required attribute "TYPE" not specified
…ntent-tmp-0"><meta name="ajs-dashboard-id" content="10440"/></template><script>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 425,
Column 8:
required attribute "TYPE" not specified
<script>document.title = "System Dashboard - Create and track feature requests …The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 426,
Column 8:
required attribute "TYPE" not specified
<script>document.body.classList.add("page-type-dashboard");</script>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 427,
Column 8:
required attribute "TYPE" not specified
<script>document.body.setAttribute("data-version","9.12.18");</script>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 428,
Column 19:
there is no attribute "PARAMS"
<dashboard params="{"dashboardDirectoryResourceUrl":"https://jir…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 428,
Column 1135:
there is no attribute "LAYOUTS"
…/dashboards/1.0/10440"}" layouts="{"layouts":[{"layout&quo…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 428,
Column 32425:
element "DASHBOARD" undefined
…quot;}],"writable":false}]}"><div id="dashboard" class="dashboard in…You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
Line 428,
Column 32486:
there is no attribute "ID"
…ass="dashboard initializing"><main id="main" role="main" class="dashboard-cont…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 428,
Column 32498:
there is no attribute "ROLE"
…rd initializing"><main id="main" role="main" class="dashboard-content"><div id…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 428,
Column 32511:
there is no attribute "CLASS"
…ng"><main id="main" role="main" class="dashboard-content"><div id="dashboard-c…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 428,
Column 32530:
element "MAIN" undefined
… role="main" class="dashboard-content"><div id="dashboard-content"><div class=…You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
Line 428,
Column 33356:
there is no attribute "ARIA-LIVE"
… js-drag-and-drop-announce" aria-live="polite" aria-atomic="true" id="drag-and…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 428,
Column 33377:
there is no attribute "ARIA-ATOMIC"
…ounce" aria-live="polite" aria-atomic="true" id="drag-and-drop-instruction">To…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 428,
Column 33729:
NET-enabling start-tag requires SHORTTAG YES
…="locale-country" type="hidden" value="UK"></div><dashboard-done /></dashboard>
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
Line 428,
Column 33729:
element "DASHBOARD-DONE" undefined
…="locale-country" type="hidden" value="UK"></div><dashboard-done /></dashboard>You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
Line 430,
Column 16:
there is no attribute "ID"
<footer id="footer" role="contentinfo">You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 430,
Column 30:
there is no attribute "ROLE"
<footer id="footer" role="contentinfo">You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 430,
Column 43:
element "FOOTER" undefined
<footer id="footer" role="contentinfo">You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
Line 433,
Column 29:
element "SECTION" undefined
<section class="footer-body">You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
Line 471,
Column 55:
start tag for "LEGEND" omitted, but its declaration does not permit this
<input type="hidden" title="loggedInUser" value=""> <input type="hidden" title="JiraVersion" value="9.12.18" />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
Line 475,
Column 77:
NET-enabling start-tag requires SHORTTAG YES
<input type="hidden" title="baseURL" value="https://jira.atlassian.com" />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
Line 499,
Column 11:
end tag for "LEGEND" omitted, but its declaration does not permit this
</fieldset>
The next message, "start tag was here"
points to the particular instance of the tag in question); the
positional indicator points to where the validator expected you to close the
tag.
Line 471,
Column 5:
start tag was here
<input type="hidden" title="loggedInUser" value=""></div>The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
Line 506,
Column 8:
required attribute "TYPE" not specified
<script>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 510,
Column 365:
"DATA-INITIALLY-RENDERED" is not a member of a group specified for any attribute
…,-_super" data-wrm-batch-type="context" data-initially-rendered defer></script>…,-_super" data-wrm-batch-type="context" data-initially-rendered defer></script>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 512,
Column 64:
required attribute "ACTION" not specified
<form id="jira_request_timing_info" class="dont-default-focus" >The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 514,
Column 80:
NET-enabling start-tag requires SHORTTAG YES
…<input type="hidden" title="jira.request.start.millis" value="1743830729258" />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
Line 514,
Column 80:
start tag for "LEGEND" omitted, but its declaration does not permit this
…<input type="hidden" title="jira.request.start.millis" value="1743830729258" /> <input type="hidden" title="jira.request.server.time" value="45" />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
Line 516,
Column 71:
NET-enabling start-tag requires SHORTTAG YES
<input type="hidden" title="jira.request.id" value="325x37054205x3" />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
Line 517,
Column 67:
NET-enabling start-tag requires SHORTTAG YES
<input type="hidden" title="jira.session.expiry.time" value="-" />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
Line 518,
Column 70:
NET-enabling start-tag requires SHORTTAG YES
<input type="hidden" title="jira.session.expiry.in.mins" value="-" />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
Line 519,
Column 102:
NET-enabling start-tag requires SHORTTAG YES
…entRequests" type="hidden" name="jira.request.concurrent.requests" value="1" />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
Line 520,
Column 62:
NET-enabling start-tag requires SHORTTAG YES
<input type="hidden" title="db.conns.time.in.ms" value="3" />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
Line 521,
Column 12:
end tag for "LEGEND" omitted, but its declaration does not permit this
</fieldset>
The next message, "start tag was here"
points to the particular instance of the tag in question); the
positional indicator points to where the validator expected you to close the
tag.
Line 514,
Column 3:
start tag was here
<input type="hidden" title="jira.request.start.millis" value="1743830729258" …
Copyright © 2024 World Wide Web Consortium. W3C® liability, trademark and permissive license rules apply.