0
How do you get to and replace the bulb that illuminates the ashtray in a 1998 Mercury Villager?
Wiki User
∙ 8y ago
Pull the ashtray out utill stop. Push the heat shield downward and give a little more pull, the ashtray will pull away from the housing. With flash light look up at the ashtray housing, you should be able to locate 2 Philips screws. Undo these screws and the whole housing will drop, the light bulb bracket located between these two screw holes. Twist the bulb housing, pull the bulb. It takes #74 wedge bulb.
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
How do you Replace crankshaft on 1999 mercury villager?
You don't, you replace or rebuild the engine.
How do you replace the moniford on mercury villager?
I would like to answer that but I don't know what a "moniford" is.
How do you replace dash lights 1994 mercury villager van?
To replace lamps the cluster must be removed.
How do you replace the odometer cable on 1998 Mercury Villager?
You don't as it does not have a cable. You replace the speed sensor instead.
How do you replace the fuel pump on a 1998 mercury villager?
The fuel pump is in the tank and the tank must be removed to replace it.
How do you replace the rear brakes and are special tools needed for a 1997 Mercury Villager?
The brakes on the Villager are as straight forward as the brakes on a 1965 Mercury. Only normal brake tools are required.
When do you replace a timing chain on a 1993 Mercury Villager?
The engine in the Mercury Villager does not use a timing chain, it uses a timing belt. The recommended belt replacement interval is 105,000 miles.
How do you replace the water pump tensioner on 98 mercury villager?
The water pump does not have a "tensioner".
How many labor hours to replace a water pump on a mercury villager?
3.5 HOURS
How do you replace the shift indicator bulb on a 98 Mercury Villager?
The instrument cluster must be removed to replace the light bulbs on it.
How do you replace the shift cylinoid in a 97 mercury villager?
Shift solenoids are inside the transmission, and require disassembly of the transmission to replace.
How long does it take to replace the rack on a 1998 mercury villager?
With the right equipment, a couple hours.
