Any suggestions or opinions will be appreciated.
Sam
Most Dragon Pluses will not support a Tbred processor (which the 2400+
is) without a physical modification to the motherboard (see amdmb.com
forums for how to do this). The current question out there is whether
or not the latest bios (2ba8) will accomplish this as well. So far no
one seems to have confirmed this.
Fitz
John
"Fitz" <akf...@hotmail.com> wrote in message
news:vh6cji6...@corp.supernews.com...
TO CLEAR THIS ISSUE UP ONCE AND FOR ALL...........................
NO BIOS VERSION, INCLUDING 2BA8, ALLOWS A TBRED CPU CHIP TO WORK IN A
K7V DRAGON PLUS BOARD PERIOD. TO USE A TBRED OR BARTON CPU CHIP IN A
DRAGON PLUS BOARD REQUIRES MODS TO BE PERFORMED ON THE D+ BOARD. SEE THE ABOVE
POST TO GET INFO ON THESE MODS.
Andy
I can't find any post of that mods... BUT i know there has to be
modification ( two caps) for T bred to work. But, is there possible for
Barton to work on D+? And i guess limit is still 2100+, regardless of CPU
model?
Second thing - maybe do you know if Tbred's or Barton's have locked
multiplicators? I mean right now i have 1700 and fsb set to 142M (increasing
bit by bit to see when it stops), so i guess if i buy highest possible CPU
and set fsb higher, i get decent CPU for decent price...
I would like some info on that - either from you or at least some links
Thanks!
For info on what mods are needed on the D+ boards go to:
http://www.amdforums.com/showthread.php?s=99dfb629bcba630b5d99232daee1aa32&threadid=193409
and read thru the posts. Yes, the Barton chips work on the D+ boards
after the mods are done. However, only the 3000+ makes any sense
because
the other 2 Barton chips don't allow for the higher multiplier values
to be used unless you do the wire/pin trick on the cpu itself.
If your interested in more info on running a Barton chip, email me and
I will send you info.
Andy