FT Tiny Trainer Build

by FliteTest | March 18, 2015 | (54) Posted in How To

FTScratchBuild


It's here! The FT Tiny Trainer is finally available and ready for flight. This step-by-step tutorial will show you everything you need to build your FT Tiny Trainer Speed Build Kit. 


The speed build kit is available in our online store and the the build plans are available for those of you who want to scratch build this versatile foamboard Mighty Mini.  


You'll want to put together your mini power pod first! 
More details available in the power pod article here:
http://flitetest.com/articles/mighty-minis-power-pod-build  


FREE PLANS


A solid plane starts with a solid fuselage. Always take your time and wait for the glue to dry completely before moving on.

Be sure to have the push rods cross and go out to the control horns without binding along the way.

Both noses feature doublers, to help reinforce and strengthen the plane for any situation. With this, a beginner should be able to take a few hits and continue flying, if they didn't break a prop of course.

Be gentle when forming your wing. You shouldn't have to force it to much, and be patient with the glue.

Use some spare wire to feed the servos through the wing after its closed up.

You can create your own Z-Bends with a pair of Z-Bend Pliers: Available Here!

With the plane nearly done, all thats left is strapping the wing down, and testing your controls.


We can't wait to see how your FT Tiny Trainer build turns out!
Be sure to share with photos, articles and comments!  Thank you for all of your support and input with speed build kits like this!

Let us know what you'd like to see as a speed build kit!

The FT Tiny Trainer  is part of our Mighty Minis Series and are powered with our Power Pack A (Minis) electronics setup available in our online store!

New to the R/C hobby?
Here's some resources to help get you up to speed!

Beginner Series: WATCH HERE!
Electronics Setup: WATCH HERE!
First Flight Quick Tips: WATCH HERE!

Got glue?? Get Some Here! 

FREE PLANS

Learn more about the FT Tiny Trainer here: SPECS AND OTHER DETAILS!



COMMENTS

Bayboos on March 20, 2015
Interesting observation: Baby Blender build video duration: 34 min. Tiny Trainer build video duration: 84 min :D

Great work, guys! Thanks for the wonderful toy for my kids. Good Luck, and Have Fun!
Log In to reply
MPS1985 on March 20, 2015
:))) recived my Mustang today in UK!
Thank You Flite Test:))
Log In to reply
scootertrash on March 23, 2015
Has anyone had problems downloading these plans?? Today I printed out these plans. I found they were not all in numerical order. Ok no big deal. I began to put them in order 1-19. Page 15 didn't print..Tried to print page 15. Page 12 printed out. Tried several more times same to print page 15. I got #12.what the heck is going on. I scrolled through all the pages an found #15 was #18. So I printed out Page 18 an there ya have it Page 15..I really enjoy your builds keep it up.

Log In to reply
Adler on April 1, 2015
in which size paper should I print the plan... plz help me with this
Log In to reply
Aviramg10@gmail.com on March 25, 2015
I have been building many of your designs over the last few months and having a blast flying them.
This is another great design and as usual flays great too :)

Thank you so much for what you are doing, keep on the great work you are doing, you are truly awesome!
Log In to reply
Origamipilot on April 5, 2015
Could you guys also post Depron plans? sometimes it can be a hassle to modify the plans and with your newer swappables there are so many different techniques and it can be hard to know what to do without warping a fuselage or something similar. Where you need paper you could simply use some packing tape.
Log In to reply
dav on March 20, 2015
Thank you. !!!!
Log In to reply
uwelindenberg on March 28, 2015
can I use a "blue onder" motor with this plane?

Log In to reply
_elias1 on May 10, 2015
No you need a 250 size quad motor, look at the dys be1806 and a 12amp emax Simonk esc on banggood.com
Log In to reply
Adler on April 1, 2015
in which size paper should I print the plan... plz help me with this.
Log In to reply
snetty on April 1, 2015
the Tiled PDF prints on A4 Adler, you can find it here http://www.stonekap.net/ftplans/FT-mini%20Tinytrainer-TILED-PLANS.pdf
Log In to reply
Del-Dredd on April 11, 2015
That's USA A4 which is slightly different size to rest of World standard A4.
Best way is to use Full Plan and select Poster in print options, that will print as tiled on whatever paper you are using.
Log In to reply
crona1976 on May 10, 2015
To be a little more specific, when I move the battery as back as I can that the velcro still would hold it, my CG is right at the leading edge of the wing. Just about 1.5 inches in front of the designated CG point.
Log In to reply
berker on March 22, 2015
That looks amazing. I have some experiences with these models. Once I build a rubber band powered model. Umm guys I really really want to bought this kit. But there is a little problem which I'm living in Turkey and there is no place to get some items, kits like this. Maybe I printed your blueprints and spend some time :( I'm openning your suggestions please give some advice to me

Log In to reply
gabriel robson on March 20, 2015
Great little plane.I'm going to attempt to make it into a mini bixler style plane. So watch this space.
Log In to reply
Funbags on March 19, 2015
Awesome! I'm sure many have been patiently waiting for this plans!

Thanks again for everything you guys do for the RC community.

-Matt-
Log In to reply
kevin.lu.5245 on April 15, 2015
hi,can my power fit this ?
2208/8 2600kvc ESC-30A
Prop:EP-6030 or EP-5030
20-30C,1600MAH 3CELL 11.1V LI-PO BATTERY
Log In to reply
andguent on April 18, 2015
The battery and motor looks a bit big. I'd print out the sections of the plans that includes the firewall and see if the motor mount will completely fit on it. It may all work, but CG could be a challenge.
Log In to reply
danield on June 25, 2015
If you land on tall grass, 1800 mah 3s works fine, rubber bands to hold it on and velcro to keep it from moving around. Hard surface would ruin your battery. Big motor, trial and trial.
You can fly a brick if you get the "CG" right and keep it together. That's what makes it fun.
Log In to reply
Tom123 on March 20, 2015
ft foam

Log In to reply
Norbert42 on March 20, 2015
Hey guys,

originally I wanted to build a Mini Scout and therefore got an Emax 1804 2480kV with TGS Sport 6x3E propellers @ 3S. Will it be OK for a 4Chan Tiny Trainer?

Thanks,
Paul
Log In to reply
Schrodingerslapdog on March 29, 2015
It's a part of the mighty minis series, which can all run on the same motor(s), so you're good to go!
Log In to reply
Norbert42 on April 20, 2015
Thanks Schrodinger!
Nearly finished building it from 6mm Depron :)
Log In to reply
flyboy-sd on March 25, 2015
If I get the Power Pack A option for the Tiny Trainer, will there be soldering required to set it up? Pretty new at the building process and don't want to discourage my son (or me!). Thanks!
Log In to reply
Schrodingerslapdog on March 29, 2015
The esc in that pack has a JST plug. This is a common plug for very small batteries, but make sure the batteries you buy have the right plug unless you want to solder a new one on. Other than that, everything should be plug-and-play.
Log In to reply
_elias1 on May 9, 2015
How many sheets of foam board does it take to buold
Log In to reply
udo789 on March 19, 2015
Wonderful new addition to the FT fleet. However, neither the Flite Test, nor the Lazertoyz or Altitude Hobbies Power Packs are in stock. What gives? Could you recommend HK alternates?
Log In to reply
Grearson on March 19, 2015
just take some baby Beasts or the Emax 1806 2280kv they offer along with a 12 Amp ESC and some 5g servos. You can also have a look at Banggood for those Parts if they are out of Stock at Flite Test and HobbyKing.
Log In to reply
udo789 on March 20, 2015
Thank you.
Log In to reply
1959cutter on March 21, 2015
grayson hobbies has excellent motor/esc combo and complete flight packs for beginners.
my favorite is the "disposable "foamie motor/ESC deal for $20.00!!
I can fly all the minis with them.
Log In to reply
dharkless on April 21, 2015
I am using Park 250 2200KV, 10A ESC, 800 2S, 5g servos and 7X4 props all from HobbyKing. Good luck finding props.
Log In to reply
Latubi on March 20, 2015
What's the wingspan on this?
Log In to reply
David fly PEI on March 22, 2015
http://store.flitetest.com/mighty-mini-tiny-trainer-speed-build-kit/

Wingspan - 37 inches (940 mm)
Log In to reply
Andy_ on March 28, 2015
Hey guys,
I just completed the glider version of my tiny trainer scratch build and I am having a little trouble balancing it. As I am still waiting on my batteries I went out today just using it as a chuck glider. The total weight (with servos) is 270 grams. In order to balance it properly I had to put 90 grams of dead weight right in the nose increasing the weight to a total of 360 grams.
Now the battery that I orderd weighs in at about 30 grams and the ESC another 10 grams which means that when I put them in the nose I would still be 50 grams short of balancing the plane.

What is the wheight of your planes? Can any of you confirm the weight given in the build plans of about 200 grams without battery? How did you balance your planes?

Any ideas of how I could properly balance my plane without increasing weigth drasticaly? I was thinking of building a longer version of the glider nose. Would that have a big impact on flying characteristics?

I would be very greatful for any advice!!!
Greets
Andy
Log In to reply
dharkless on April 22, 2015
You are pretty heavy. Mine has 9g servos and flag wire push rods (heavier than kit) and it weighs 202g without motor and battery. Built to spec should be just under 200g. Are you heavy on glue? You should be able to build the whole thing with less than 2 long sticks.
Log In to reply
chobson303 on April 4, 2015
I maidened my just completed Tiny Trainer today. I initially flew her with a 7.4 1000 mAh battery and a 5x3 prop. I thought she flew to slow. I changed to a 1250 mAh and a 6x4 prop. What a difference. She flew great. Another great job by the Flite Test guys. thanks. Oh and I'm recommending the Storch to all my friend that are interested in starting the hobby. I just think it's a great starter\trainer plane. I just love mine.
Log In to reply
gsgraber92 on March 19, 2015
Do you think you guys will offer this model in a standard power pod version? Could it be scaled up to accommodate the standard power pod? We haven't made the step to the mini hardware yet. Great plane, may force me to buy mini power plants!
Log In to reply
FALSARC on March 20, 2015
look at the ft simple soarer, you can easily reconfigure it into a changable power pod
Log In to reply
David fly PEI on March 22, 2015
The simple soarer has a power pod with it so you can use you pods on that

Log In to reply
Matt Mountain on March 20, 2015
Great job: Thanks!

Also: At it again with the di/poly eh? ;-) Dihedral mate! Not POLY; There's only two angle changes: Di; hence dihedral gauge! Poly would be dihedral at the centre of the wing and then another bend up at the tips for example....
Log In to reply
helifino on December 28, 2015
Hedral = surfaced. Di = two. Poly = many. Thus dihedral = two-surfaced, polyhedral = many-surfaced. Two bends = three surfaces, therefore polyhedral is correct. It is also the correct term for wings with three or more bends, whereas 'polydihedral' is not.
Log In to reply
PropSpinner on March 20, 2015
Great job! You have another winner.

I like when you guys do a team build. I find it very entertaining. I know we can't always have the comedy styling of a pseudo celebrity like Josh Scott ;-) but one of the other Flite test guys or gals would be good.
Log In to reply
nizzamms on March 21, 2015
Can anyone release plans convert to a pusher glider...i need it for mini FPV
Log In to reply
RinacioPT on April 4, 2015
What material is made the plane ( what appears white paper , the plane is all done it) ?
Log In to reply
andguent on April 18, 2015
It is often referred to as "Dollar Tree Foamboard" in the US. Outside the US it apparently is hard to get a hold of. I hear Europeans often do depron or corrugated plastic. Search the FliteTest articles for foamboard and you'll probably come up with some more generic building articles.
Log In to reply
karam.haddadin.52 on May 18, 2015
does a 3s 1500mAH work, because thats the lightest battery i have lying around

Log In to reply
sherman8tor on June 21, 2015
I think it would be too wide to fit inside the plane. If you worked at with Velcro and rubber bands, you might be able to hang one under the belly, but the plane would be heavy.
Log In to reply
grackle on March 19, 2015
Great job, gents.
Log In to reply
jackbrisbin on March 29, 2015
My son and I built two of the Tiny Trainers today. His was the speed build kit, I printed out the tiled plans and built the second one along with him. Maidened his today also. Handles winds high enough to make the flags stand out straight from the flagpole. It will almost hover when you nose it into the wind. We used the Turnigy Park 250 motors I already had from previous planes, and the Hobby King Blue series 12A ESC.
Log In to reply
kah00na on May 13, 2015
The way Josh catches the planes out of the air is awesome.
Log In to reply
sherman8tor on June 21, 2015
There's a glider pilot at the field that does the same thing. Nothing else quite says "Yeah, I'm that good" as well. ;)
Log In to reply
kah00na on June 21, 2015
I tried it a few times myself, most of the time I end up flying it too far away from me. Of course, the one time I actually caught it, no one was watching and I couldn't do it again to prove it. :)
Log In to reply
dharkless on April 21, 2015
Great design! We are building 4 from plans for a high school physics class. They are almost ready to fly. I am also working on a125% version. The tiled plans just fit on 11 X 17 if enlarged 125%. Modifications are required of course due to the foam thickness but so far everything is working out.
Log In to reply
VolksRocket on March 20, 2015
Hi,

Love it! I think you are copying my design! The TUT-1, The Ultimate Trainer - 1!
Log In to reply
KVFlyer on April 5, 2015
Excellent job Flite Test crew!!

I thank you for getting me back in the hobby after 20 years!! Flying today was like I remembered but even better! I maidened my tiny trainer today and it is AWESOME!! After a learning curve and crashing my FT Mini Speedster. That same day I crashed you released the tiny trainer and that night I began building the tiny trainer which got me flying today through 4 full batteries.

Very forgiving and fun plane even with 3 channels and poly wing. High rates recommended for windy conditions.
Motor Emax 1806 1430kv
Prop APC 6X4E
Esc Emax 12A Simon K
Turnigy 800 mah 40C 3s 3 cell
12 minute flight with 37% charge remaining. I cant wait to buy a 1000 mah. I tried to fit my 1300 mah 3s but it wont work.

Flite Test You ROCK!!


Log In to reply
RinacioPT on April 5, 2015
What is a radio that you recommend for whom this is the first aircraft, a radio that come with the receiver, a cheap radio to start?

Thank await response, RinacioPT
Log In to reply
dharkless on April 21, 2015
FlySky FS-T6 is very value packed for under $60. It is programmable for 20 models, has mixing, elevons, etc. You can get additional receivers for $5 (3 channel - Hobby King "GT-2 2.4Ghz Receiver 3Ch") to $10 (6 channel - Hobby King "HK6DF 6 Channel 2.4ghz").
Log In to reply
Rav on April 8, 2015
You may get many opinions and here are mine.
- try and visit your closes RC Flying club and speak to flyers there. If you have never flown before you may want to consider having help not only to save you frustration but also to guide you on safety.
- I use the FrSky Taranis which is not cheap but once purchased it may be the only one you ever purchase so in the long run cheaper.
- Orange Tx & Rx from Hobby King. A club member uses it. He also happens to be a real plan pilot instructor:)
Log In to reply
crona1976 on May 10, 2015
Hi guys, just finished building the plane. I used the Power Pack A and upgraded to the 3 cell 800 MAH. It is extremely nose heavy. Even when I pull the battery all the way back under the power pod. What am I doing wrong, any ideas??
Log In to reply
akmk10000 on March 22, 2015

I really like your build videos. Josh does an excellent job of explaining things and demonstrates a lot of patience. I noticed something in this one that you hadn't explained before and I don't think you got it quite right. A dihedral is defined as an angle formed by two planar (flat) surfaces. A polyhedral is a shape formed by more than two planar (flat) surfaces. I had never heard the expression poly-dihedral. In my experience it is either flat, dihedral, or polyhedral when talking about wings. I might be wrong on that point, but that is the way we say it where I live.
Log In to reply
ftwingnut on March 26, 2015
As usual, you do a great job with these build videos. Good clarity on what you are doing and why. I love you guys and can't wait to come back to FliteFest! I'm already registered with my sons and got the camping pass too!
Log In to reply
Lmontanez on April 13, 2015
beautiful job guys. Congratulations.
any news about the "FT Foam" ????
Log In to reply
scott firman on June 7, 2015
Thought I would be smart and cut two tiny trainer and save one as a pattern.It worked, but took me twice as long I think. After reviewing the build video five times I finally got it that you can use a smaller or larger servo than the listed 5 gram servo that is practically impossible to find.Thanks for getting me back into flying planes.I also have the Aprentice by Eflite and love it.
Log In to reply
Garreta234 on June 17, 2015
Good job flite test!!! I built mine in 1 and a 1/4 sheets of foam, but only built the trainer wing and power nose. Its a great plane for caching the thermals. I'm flying with 2 9gram servos, and a old hi tech receiver, and a 5x3 prop, no prob.I noted that some of the commenters where having a hard time finding props, Just go on amazon and look there. 8.00$ for a 10 pack of green or black, worked great for me.
Log In to reply
agentorange2000 on July 10, 2015
Cool. I was wondering how many pieces of foam board this would take up. I'm going to start w/o ailerons as well.
Log In to reply
HawkInTheSky on June 11, 2015
Hey guys. I'm really interested in scratch building airplanes. But I have no idea how to actually use the plans to cut out the shapes from the foam board. Do I simply print the plans, trace it on the foam board and cut out the shapes. Please explain how I'm supposed to properly use the plans to make the wings and stuff. Any advice will be greatly appreciated. Thanks
Log In to reply
Goose on June 21, 2015
I make templates the first time, if it is going to be a plane I like and crash a lot. I cut out the plans and glue them to cardboard and then cut them with a sharp bladed knife. U can reuse the templates again and again. Or if you just want to build one, just tape the plans to the foam board and cut. There is also a few articles on this if you search
Log In to reply
Garreta234 on June 17, 2015
Replying to, HawkInTheSky. This is my method;print plans, cut on dashed lines, tile plans together with scotch tape lining each piece up with the other , cut out each part of the plans, tape on foamboard,always cut inside cuts first,then outside cuts and your done!
Log In to reply
Fastlearner on June 29, 2015
Just maidened thy Tiny Trainer at sunset. It was one of the most relaxing flight let alone maiden flight ever. Flew through 2/3 of a battery. I let my son finish the battery. Forgot to put velcro on the 2nd battery. Now we're going to help some kids make these for 4H aerospace projects...
Log In to reply
Fastlearner on June 29, 2015
Well done, Flite Test
Cobra 2204/2300kv
Castle creations 15A
9g servos
Tactic Radios
Mark Twain Hobby... Local Hobby Store
Log In to reply
ashishc on July 9, 2015
Hi Fastlearner,
What was the total weight of your model with battery and all other stuff?

Log In to reply
linz27 on June 10, 2015
Hi, can anyone tell me the weight of a sheet of Dollar Tree foam board. Thanks
Log In to reply
sherman8tor on June 20, 2015
A 20" x 30" sheet weighs 108 grams.
Log In to reply
danield on June 15, 2015
Big Smile to all you fun people.
I've built 22 of your planes and has bin a great learning experience.
Question on tiny trainer, then you rubber band the wing on, it warps the wing, should-en there be a notch for the wing to fit in?
Log In to reply
sherman8tor on June 21, 2015
I haven't noticed any warping, and the wing works fine without a notch.
Log In to reply
danield on June 25, 2015
On sport wing, at V in wing , it hits in rear, I notched fuselage where rear of wing hits, fine now. don't why it didn't fit . Flat wing of coarse was OK.
Log In to reply
sherman8tor on June 20, 2015
I maidened my Tiny Trainer this morning. What a great design! Easy to fly, forgiving, and lots of fun.
I had to tape a couple of quarters to the end of the tail to get it to balance with the 72-gram 3-cell 850 mAh batteries that I use in my T-Rex 250.
I very quickly went from 66% throttle travel to full throttle travel and low throws to full throws. I'm a complete noob flying planes but an experienced heli guy, so I'm picking it up pretty fast. Tonight I'm building the advance wing, and next week I think I'm going to build the glider wing. It would be fun to build the Bixler version too. Really fun design guys. Great job.
Log In to reply
sherman8tor on June 21, 2015
After yesterday's great success with the basic wing, today I flew the sport (4-channel) wing. There was about a 5 to 8 mph wind, which is a lot for my experience level and a plane this light, but it flew great! What a fun airplane!

I experimented with an APC 6x4e prop that uses 20% more power. It's more rigid and doesn't resonate (howl/whine) at full throttle.
Mine was the cheapest airplane at the field by a long shot, but I'm sure I was having the most fun. :)
Log In to reply
GrimJet88 on November 9, 2015
This is my 4th build and it was the most fun. It glides amazingly well and can even do some aerobatics. Love it!
Log In to reply
Nose Dive on October 8, 2015
Im a TOTAL beginner. I did watch a ton of FT- video's and (scratch) build even a few (3) planes. But when I put this puppy in the air I had zero minutes airtime under my belt.
From all the video's I watched I learned that everyone crashes, so I wasn't put off by that.

I didn't have anyone to film my maiden flight but for a Very First Timer I was happy with the result. The plane flew fairly well, considering I scratchbuild it from tiled plans.

- Scratchbuild it: - 1 weekend
- Used the FT Powerpack A + a 3cell battery (little havier then the 2 cell)
- Crashed it: - about 5 times
- Flew it: about 15 min airtime (I ran out of propellors)

The crashes, mainly caused by my inexperience cost me 2 propellors and did some damage to the plane. There are a few things I can say about this experience.

The Trainer is the perfect plane to begin with If you have no experience whatsoever.
I did build both wings (glider and aileron) but I started with the gliderwing and will stick to those 3 channels (throttle, rudder and elevator) for now untill I have more experience and break less (none) props.

As far as the design/build is concerned I recommend a few reinforcements.
Although the rubberbands take a major load out of the hit during a crash (cartwheel)
they didnt prevent the foamboard from ripping at the attachment points (BBQ sqewers). Upon carefull examination of the entire airplane these are the mayor points I need to reinforce. Ill be using old creditcards for that. Also, even though the FT team shows this in other build video's but not in this one, Ill be covering ALL the exposed foam (edges) with glue or tape, avoiding the paper to come off the foam board.
Log In to reply
Nose Dive on October 9, 2015
Since this is a STEP-BY-STEP beginners plane, removable landing gear would be the next logical step. Idea's anyone?
Log In to reply
COSkies on February 9, 2016
Build, Crash, Repeat!
Log In to reply
COSkies on February 9, 2016
Build, Crash, Repeat!
Log In to reply
kb0bnz on October 29, 2015
I have found that a paint stick is just the right size to clean out the small strips for fol;ding


Log In to reply
Brock on December 13, 2015
Maidened mine today. Made in Australia with our heavier/denser foamboard. Powered (spare 250 size quad motor), 3 channel, 500mah 3S battery.

It was too windy, but I flew anyway. It flew great, but the wind was a problem. Not sure how windy, but I could 'hover' by pointing into the wind at about 50% throttle. Wind cause a couple of crashes, and I had one graceful landing. Damaged powerpod, which I didn't reinforce with tape. Easy enough to make a new one of those.
Log In to reply
Grizzly73 on December 30, 2015
Just ordered mine today with my Christmas money looking forward to getting it in the mail and building it
Log In to reply
agentorange2000 on July 10, 2015
I just taped all the tiled plans together and got an idea of how the build will go and what parts are what. I am going to start with the power nose and the glider wing. I like how you guys keep re-using similar processes - I work as a software engineer and love repeatable processes. I built the Storch wing but stopped b/c it it just too big for what I want to fly right now. As others have noticed the Tiny trainer is very similar to the Storch. My niece and nephew are also coming for a few weeks so I am going to build some chuck flyers with them.
Log In to reply
vitorbarros on August 17, 2015
Ok guys here goes my experience...
this weekend i'd maiden my ft tiny trainer!! it was a blast... BUT...
The cg was way ahead and i had to put way too weight on the back to compensate... but it flew anyways... and it crashed too... but that was due to my persistence to fly it without low rates!
It was fun tough! i'm back to the work bench and will use the wing and the tail to maybe do a frankenplane!
Log In to reply
McMonkey McBean on October 21, 2015
Does this need to have thrust angle like the other mighty minis?
Log In to reply
Brock on December 13, 2015
The build video does say you build it with the thrust angle.
Log In to reply
Carwashmec on October 22, 2015
I am currently building this plane. I cannot find anywhere what size pushrods to use. I have some 1mm (.040 inch) piano wire but it is very flexible in this long of a length. Should I get thicker wire?
Log In to reply
RCMasterx on October 26, 2015
Hi Carwashmec. I recently scratch built this plane and used 1.2mm (.047") piano wire and it's been flying great. As long as you use the coffee stirrer/foam block recommended, you should have no problems.
Log In to reply
SukDeezNutz on July 6, 2016
How long are the pushrods?
Log In to reply
docmorty1 on July 30, 2015
I just scratch built this plane and handed it to 8 nieces and nephews, they had a great time with it. three days later after being out side , in the am dew and it still flies.

very durable , these children range from 12 to 3 yrs old's, flies great! it took a beating from the kids trying to see who could get the longest flight. Added 3oz of weight to the body and got longer flight. balance the plane before flight.
Log In to reply
MM on August 9, 2015
Just a heads up to anyone building from plans. Plans are printed like balsa models, where you build and cut on top of the plans. If you tape the printed plans to a board as a guide, the red score lines should be on the "bottom" of the board you are cutting. Scoring your lines through your template sheet builds the mirror image of what is shown in the build video. Only really matters on assymetrical parts, like fuselage and elevator. Maybe I missed this in one of the videos.
Log In to reply
Nose Dive on October 8, 2015
I scratch build from tiled plans which I 'stick' to the foam with just a whiff of spray glue. After scoring and cutting i peel the plans off. You're right some of it gets mirrored. In my case the little cut-out for the control horn of the rudder ended up on the wrong side of the fuselage. As well as the position marks for the control horns for both rudder and elevator were reversed.
Log In to reply
dvx216 on January 20, 2016
Tiny trainer is done ready for servos.I already built the stout wing trainer but since I'm a newbe I decided to build the tiny trainer to start with a 3 channel then move to a four channel and then I eventually start flying the Stout.I used yard marker flags from Home Depot for the servo push rod.Unfortunately here in Orrville Oh. we don't have a hobby shop close by so the flags were available.
Log In to reply
zaiydmalik on October 25, 2015
Hello everyone this Zaid your newly member from India.
I really like the way you have provide us the video and stuff to build for new-comer like but as you know those part which I see are hard to get special the exact specifications like i saw we servo of 9g but the main question come where I can get frame kits
I have dream to build myself even if it's the simple trainer model I saw the structural pdf for the plane but I don't know to even to put layout on simple foam.It would helpful provide some information on it. Like for example the foam as in India find dollar tree foam is hard.

Thank you
Zaid Malik
Flying high is my dream..
Log In to reply
RCMasterx on October 26, 2015
Hi Zaid. I download the full scale plans and take the pdf to a printing store than can print the line drawings to scale. This model had to be printed on two 4' x 3' paper sheets. I had them print two copies so I would be able to cut one set and keep the second set in tact. I cut out the outlines of each piece the glued the paper to poster paper/card stock to use as a template. I then traced the outline of the pieces onto the foam board. Make notations on the templates so you can mark score lines and other markings. If you are using 9gr servos, make sure you offset them from each other. They will be a tight fit.
Log In to reply
zaiydmalik on October 27, 2015
Hi RCMasterx thanks for the step up plan i start working in it. Hope to succeed in it would glad and will post once it done and ready to fly. Wish me luck
.!!!
Log In to reply
Aeropiff on October 29, 2015
I LOVE THIS PLANE...it was my first plane and it was amazingly amazing i am planning to trick out the glider wing and make it VTOL :-)

Log In to reply
Wretch on September 1, 2015
Hi all,
I've scratch build mine FT trainer out of depron foam covered with tape and I have a problem.
I'm using the glider nose together with the rudder and elevator controls and no matter what I do my plane refuses to fly straight (always turning to the right). Only with my rudder stick fully to the left flies straight. As far as I can tell every surface is straight and level.

Please help me, all tips are welcome.





Log In to reply
codedshadow on January 27, 2016
do you think i could run an MT2204-2300kv?
Log In to reply
mikeporterinmd on February 5, 2016
On props. I ordered gemfan 6030 props, nylon glass fiber. I figured they might do better in belly landings rather than the standard props. I also have a bunch of 5030s for my quad that I might try. Of course, these come in CW/CCW sets. What I was wondering is: why not use both CW/CCW, but just change the motor connections when ready to switch rotations? I was planning to solder the motor to the ESC, but perhaps I will leave the bullet connectors on. The other consideration is that I bought power pack A which came with a blheli firmware. Can I reverse the ESC by re-programming it? Something to think about.

Mike
Log In to reply
Mark Lawry on July 7, 2016
The motor pod is designed with a thrust angle. If you want to reverse the motor direction, you probably want to trim the front of the motor pod square.
Log In to reply
mikeporterinmd on February 23, 2017
I ended up using APC style props which work very well.
Log In to reply
Hibbel on October 1, 2016
Hey guys, I've built this plane using cardboard. Yesterday i maidened it. After about 30 seconds airtime the wing broke in the middle. If you're trying to use cardboard, don't use a bit of tape and bit of hotglue on the wing joint. I've rebuilt the wings and the nose, since it got damaged too. The wings are now connected using a piece of wood cut in the shape of the wing. I then drilled 4 holes with a 2.5° angle into the sides in order to add barbecue sticks which also support the wings. The wings are then connected to the wood using superglue on the sticks and hotglue on the joint.
Until now i didn't relaunch it, but i will be soon. Still waiting for new props :)
Log In to reply
Siodlo on April 13, 2016
I can buy foamboard sheets in sizes:
50x70cm
70x100cm
100x140cm
How many and wich ones I need to build it?
Log In to reply
pazmanuelo on September 13, 2016
Hi, I want to know if I can use the sport wing as a 3CH config first to learn and then add the servos and flying with full 4CH. It is to save material.
Log In to reply
edenmannh on October 11, 2018
I wouldn't the dihedral is really helpful, if you are using a 3CH on a sports wing, the plane has near to no self-levelling tendencies. Go with the trainer wing to learn out, or just jump straight into the 4CH sports wing.
Log In to reply
grifflyer on September 4, 2016
hi i'm way beyond the tiny trainer, but i wanted to build it, and possibly glue the wing on give it a stronger spar and convert the glider version to a discus launch glider

good or bad idea

Log In to reply
Mayur Kolte on May 28, 2016
hello,
i am new to this hobby
which type of foam is used for building
Styrofoam or Depronfoam ??
thank you
Log In to reply
magic_marty on July 19, 2016
Scratch built one of these to have something to putt around with and love the way it floats around..Only thing is i have broke several props on landings is there any way to stop breaking them? The esc i am using has no motor brake so the motor free spins with the throttle off..
Log In to reply
mikeporterinmd on February 23, 2017
A lot of people switched to 6x4 APC style props. They are much stronger. I've never actually broken one.
Log In to reply
edenmannh on October 11, 2018
Yup, I've just built the trainer and after many many hard crashes, I've never broken a prop. Even after smashing straight into a tree! It's quite remarkable really...
Log In to reply
Robocog on October 29, 2016
Just a quickie to say thanks - I built this as a chuck glider at first (which it survived both me and my 5 year old playing with) Recently I added the power pod and flew it with the polyhedral trainer wing - it flew perfectly and it inspired me to carry on with it
Just come in from its maiden voyage with the sport wing and ailerons - boy does this design flatter newbie pilots!
Managed a few rolls and loops and even managed a hand catch The people that were at the field were blown away that is was made from laminate floor insulation sticky tape and hotglue and could fly so nicely in the hands of a newbie pilot
Mini arrow plans printed off and waiting for a free moment to get cutting and gluing!
Thanks once again - keep up this great work!

Fantastic design that flies waaay beyond my expectations
Mrs did video some of it - will try and upload and post a link to it (assuming a plane can be seen when we download and watch it) :D

Log In to reply
mukhlis1010 on August 6, 2017
hi guys, could I make DIY power from 18650 pack for rc aircraft..? thnkss.
Log In to reply
edenmannh on October 11, 2018
The best little plane in existence! Man, it can take a beating, even after making many quite major mistakes in the build process, it still flies great. This plane has successfully managed to get me into the hobby, there will certainly be more scratch build planes to come in the future. Thank you for all the work you put into this hobby! I'm just waiting for the next calm day to take her up with a six-meter ribbon attached! I'm very excited. I highly recommend this plane, plenty of power, easy to fix and a great plane to learn on.
Log In to reply
David Swartz on November 18, 2018

Log In to reply
David Swartz on November 18, 2018

Log In to reply
PhoenixofMT on March 19, 2019
I was exploring the option of printing the full-size plans for the Tiny Trainer on the 24" plotter we have at work. Unfortunately, the full plans are 34.38 x 28.66 in. instead of your standard 30 x 24 in. Is there an update in the works? I see some of the other plans on the site, such as the mini sparrow, are at version 1.1 and have a lot of new formatting to make it easier to match parts, identify bevel cuts, etc.
Log In to reply
vorriio on September 11, 2019
can anyone tell me the thickness of foam to use? i wanna use the foam on a laser cutter but dont know the size of foam sheets to use
Log In to reply
linuswolfman@gmail.com on April 10, 2022
Im in the uk and am planning to scratch build a tiny trainer. i was wondering what batteries people recommend as the ones flite test suggest to use are very hard to find with cheap shipping to the uk.
i would really appreciate it if anyone recommended any other batteries that will give good flight times with the trainer and not from banggood or aliexpress as weve had very bad experiences with them in the past. thanks

Log In to reply
agupt108 on December 19, 2022
Hi! What size paper do you print your plans on so that it is to scale?
Log In to reply
kp juneda on December 5, 2023

Log In to reply

You need to log-in to comment on articles.


FT Tiny Trainer Build