|
Standard Features
The laser portion of the C1 features the AMADA/Fanuc AF2000i-B LU2.5 resonator
with 2.5 kilowatts of cutting power. The laser head moves in the Y-axis via a
direct drive servo mechanism for maximum speed and accuracy, and is isolated
from punching vibration to help maintain beam integrity and cut quality. A
cartridge-type lens assures simple and fast lens changes when required. The
resonator is located on a frame designed to reduce floor space requirements
and to provide isolation from punching vibration.
The punching portion of the C1 is based upon the highly successful AC-series
of 22-ton servo drive turret punch presses. The servo drive not only offers
punching speeds of up to 370 hpm on 1" centers, but is also more efficient
than hydraulic punch drives, requiring no pump or chiller.
To maximize punching productivity in conjunction with laser cutting, the C1
features the new 45-station MPT Multi-Purpose Turret. Two of the unique
features of the MPT turret include four tapping tool stations (English and
metric thread tools available) and three powered die lift stations to
facilitate upward forms while reducing material scratches and preventing
downward forms from hitting the forming dies during sheet movements.
The C1 is equipped with a versatile brush table that provides a number of
features to increase productivity and part quality. The brushes help reduce
material scratching, while limiting punching noise. Pop-up urethane rollers
help reduce brush wear during the laser processing of thick materials. Special
high-temperature brush material is installed in the laser cutting area (Y-
axis), and a large 15-3/4" x 50" work chute helps ensure the easy removal of
finished parts and scrap. A lifting brush table section helps to remove
downward forms from the die before the next sheet moves into place. An
automatic sheet loading feature simply requires the operator (in manually
loaded applications) to place the sheet within approximately 2" of the X-Y
gauge blocks, and activate the automatic loading mechanism. This provides
accurate material placement against the gauge blocks and activates the
pneumatic work clamps. With its full 4' x 8' sheet capacity in up to 1/4"
thick material, the C1 achieves better material utilization ratios, especially
when using AMADA's Dr. ABE Blank software for dynamic nesting.
Max. sheet size w/o reposition: 79" x 50"
Amada/Fanuc laser resoxnator model: AF2000i-B LU2.5
Max. sheet weight: 110 lbs. (F1) 330 lbs. (F4)
Max. material thickness: 0.25"
Max. continuous laser output: 2.5kW
Tap applications: Mild steel, stainless steel and aluminum
Punch servo drive: AC servo
Press tonnage: 22 tons
Turret capacity: 45 station (1) AI + (4) tapping stations (MPT turret)
Max. hit rate: X Axis 370 hpm - Y Axis 275 hpm
(on 1" pitch at 0.118" stroke) for punching pattern
900 hpm (at 0.019" pitch and 0.055" stroke) for marking pattern
Work chute size (X/Y): 15.75" x 50"
Max. table feed rate (X/Y): 3,150 ipm x 2,362 ipm
Positioning accuracy during combination process: 0.0027"
Approx. floor space requirement: 226 sq. ft.
Power requirements: 69Kva
Machine weight: 15.5 tons
RETURN to our home page