Tips for cleaning with the steam cleaner

Carpet cleaning with the steam cleaner:

The carpet is in every house the absolute dust u. Strainer. It attracts the dust and binds it in its tissue / fibers. You really only realize this when you do not have a carpet in a room, where dust mullets are formed immediately, which are easy to recognize and remove, but for the time being they cloud the appearance a little bit.

The disadvantage of the carpet is clearly that allergy sufferers have great problems with the bound dust u. On the other hand, the carpet darkens extremely due to the dust absorbed. This will not really be noticeable until you clean the carpet and recognize the dirt broth (see 2nd video) and, secondly, the lighter colors of your rug.

A positive side effect of cleaning with the steam cleaner is the extensive killing of the mites and pathogens in the fibers, which can be further improved by using the cleaning concentrates below.

A big advantage when using the steam cleaner compared to a conventional steam cleaner is the existing extraction, with which the dissolved dirt / dust is sucked off and collected in the dirty water tank. In the steam cleaner, the dirt is also released, but the dirt particles are removed only insufficiently with the coated microfiber cloth / cotton cloth from the carpet. One part takes up the microfiber cloth, another part remains in the carpet.

When cleaning the carpet with the steam cleaner, however, attention must be paid in particular to the temperature resistance and color fastness of the carpet, especially synthetic fibers are to be treated with caution, as they can not "process" the high temperatures at the floor nozzle at full steam performance and "stick "Could. If you are not sure whether your carpet is suitable for steam cleaning, try out the steam cleaner in a place that can not be seen, then you will immediately see if cleaning a carpet with a steam cleaner makes sense. Of course, you can go deeper with the vapor pressure, then "processed" the carpet cleaning possibly better, but the cleaning effect then decreases accordingly.

If not in spring - when?

Nowhere are so many mistakes made in professional building cleaning as in carpet cleaning. This does not mean that all carpets are cleaned wrong, but let's face it - which service provider can say that he has never received a complaint from the customer in the field of carpet cleaning!

It should be the goal of every building cleaner to satisfy the customer immediately after the first cleaning so that he entrusts you with other tasks. Only then can you build a sustainable and profitable business with professional carpet cleaning. Get your stanley steemer promo code here for a limited time.

State of the art today, with surfactant-free cleaners, such. To clean OneStep®, carpets and upholstered furniture, as these cleaners leave no sticky residue on the surface and thus neither cause damage, nor costly extraction of foaming liquors are necessary.

As an added bonus, your customers can be certain that surfaces cleaned with surfactant-free cleaners will not immediately begin to foul.

The mechanics are more important than the chemistry

However, the chemistry is nowhere near enough to achieve a good, efficient, ergonomically acceptable, and thoroughly successful result on carpets

and to achieve upholstery. The mechanics used here has a tremendous influence! Only if the surfaces to be cleaned are not too wet after the cleaning process, sufficient rinsing liquor has been sent through the fiber, then it is ensured that a very good cleaning result can be determined after a short drying time.

The cleaning stations from our company fulfill all these requirements in full: the drying times are between 30 and 90 minutes for upholstery, and between 60 and 180 minutes for carpets. And, it should be noted here, dry means that a residual moisture of less than 5% is meant so that the cleaned surface can be fully reused.

Our special spraying technology leaves behind, despite the large amount of water

up to five liters per minute only small amounts of water in the textile surfaces,

As investigations of the FIGR in Metzingen impressively show. The complex but highly efficient process is superior to all other technologies and leaves nothing to be desired.