Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help 
HPTIOP(4)		    Kernel Interfaces Manual		     HPTIOP(4)

NAME
       hptiop -- HighPoint RocketRAID 3xxx/4xxx	device driver

SYNOPSIS
       To  compile  this  driver  into the kernel, place the following line in
       your kernel configuration file:

	     device hptiop
	     device scbus
	     device da

       Alternatively, to load the driver as a module at	boot time,  place  the
       following line in loader.conf(5):

	     hptiop_load="YES"

DESCRIPTION
       The  hptiop  driver  provides  support  for  the	 HighPoint  RocketRAID
       3xxx/4xxx series	of SAS and SATA	RAID controllers.

HARDWARE
       The hptiop driver supports the following	SAS and	SATA RAID controllers:

       o   HighPoint RocketRAID	4320
       o   HighPoint RocketRAID	3220
       o   HighPoint RocketRAID	3320
       o   HighPoint RocketRAID	3410
       o   HighPoint RocketRAID	3520
       o   HighPoint RocketRAID	3510
       o   HighPoint RocketRAID	3511
       o   HighPoint RocketRAID	3521
       o   HighPoint RocketRAID	3522
       o   HighPoint RocketRAID	3540
       o   HighPoint RocketRAID	3120
       o   HighPoint RocketRAID	3122
       o   HighPoint RocketRAID	3020

NOTES
       The hptiop driver has only been tested on the i386 and amd64 platforms.

SEE ALSO
       cam(4), hptmv(4),

HISTORY
       The hptiop device driver	first appeared in FreeBSD 7.0.

AUTHORS
       The hptiop driver was written by	HighPoint Technologies,	Inc.

GNU				 May 12, 2007			     HPTIOP(4)
NAME | SYNOPSIS | DESCRIPTION | HARDWARE | NOTES | SEE ALSO | HISTORY | AUTHORS

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=hptiop&sektion=4&manpath=FreeBSD+7.1-RELEASE>

home | help