Thread: Disable Cintiq rub strips?

I have tried going through System Settings>Input Devices>Graphic Tablet>Pad Buttons. In the Touch Strip section, is the option to set the strips to "disable." Unfortunately this does not work. The touch stips are still active. Is there a way to actually disable all input from the touch strips within Linux? I may even be willing to physically open the Cintiq (12WX) and pull plugs or cut wires as long as the screen and stylus remain functional.

I'm using Kubuntu 12.04, but I believe the input devices section is the same in Ubuntu and Mint.

Hi Jack the R,

I think you would be able to do that with a xsetwacom command assigning the touch strips to nothing.

What's the output of the following command in a terminal?

Code:

xinput list

That will give us the <device name> to use in the xsetwacom command.

Here's what I got -

Code:

⎡ Virtual core pointer                          id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                id=4    [slave  pointer  (2)]
⎜   ↳ Wacom Cintiq 12WX stylus                  id=9    [slave  pointer  (2)]
⎜   ↳ Honey Bee  Nostromo SpeedPad2             id=11   [slave  pointer  (2)]
⎜   ↳ PS/2 Logitech Mouse                       id=12   [slave  pointer  (2)]
⎜   ↳ Wacom Cintiq 12WX eraser                  id=13   [slave  pointer  (2)]
⎜   ↳ Wacom Cintiq 12WX pad                     id=14   [slave  pointer  (2)]
⎜   ↳ HID 045e:00be                             id=16   [slave  pointer  (2)]
⎜   ↳ Pystromo Input Remapper                   id=15   [slave  pointer  (2)]
⎣ Virtual core keyboard                         id=3    [master keyboard (2)]
    ↳ Virtual core XTEST keyboard               id=5    [slave  keyboard (3)]
    ↳ Power Button                              id=6    [slave  keyboard (3)]
    ↳ Power Button                              id=7    [slave  keyboard (3)]
    ↳ LITEON Technology USB Multimedia Keyboard id=8    [slave  keyboard (3)]
    ↳ Honey Bee  Nostromo SpeedPad2             id=10   [slave  keyboard (3)]

OK, given that device name what happens to the right touch strip when you run these two xsetwacom commands in a terminal?

Code:

xsetwacom set "Wacom Cintiq 12WX pad" StripRightDown ""
xsetwacom set "Wacom Cintiq 12WX pad" StripRightUp ""

If that works then you'd do the same with the left one.

Still mucking up, changes me from the paintbrush to the airbrush in GIMP.

Before and after you run the xsetwacom set commands what is the result of running these get commands?

Code:

xsetwacom get "Wacom Cintiq 12WX pad" StripRightDown
xsetwacom get "Wacom Cintiq 12WX pad" StripRightUp

StripRightDown is 4, StripRightUp is 3. Before and after the set commands.

Interesting. The xsetwacom set commands should override the hardcoded key values from the kernel(?) or the KDE configuration utility if you are using it. So is this a bug? In Kubuntu 12.04 or in xf86-input-wacom? You should have version 0.14.0 which is pretty recent:

Code:

xsetwacom -V

Hmm. There's a couple of commits after 0.14.0 that may actually address your "bug". The 0.15.0 release tar is due anytime or we could clone the git repository.

3 and 4 are for vertical scrolling I think. Does that make sense with what you are seeing?

But it does answer a question I had on whether the strips would take an integer assignment. For buttons to disable them you can assign them 0 in a static configuration (as opposed to a run-time configuration like xsetwacom). So let's try that rather than updating xf86-input-wacom yet.

We'll work from: http://sourceforge.net/apps/mediawik...le=Xorg.conf.d

If you already do not have /etc/X11/xorg.conf.d create it with:

Code:

su - -c "mkdir /etc/X11/xorg.conf.d"

Then we'll create a .conf file:

Code:

su - -c "kwrite /etc/X11/xorg.conf.d/52-wacom.conf

Then for it's content add:

Code:

Section "InputClass"
	Identifier "Wacom pad options"
	MatchDriver "wacom"
	MatchProduct "pad"
	# Apply custom Options to this device below.
	Option "StripRightDown" "0"
	Option "StripRightUp" "0"
EndSection

Then Save and restart. If that works then you can add the left options below the right ones.

I do have 0.14.0.

The right rub strips do scroll in Firefox.

Sadly they still scroll in Firefox, after creating 52-wacom.conf.

Well that sure is sounding like a bug.

Let's try updating xf86-input-wacom and see if the xsetwacom commands or the xorg.conf.d .conf file will then work.

I think you should try cloning the xf86-input-wacom repository and then compile and install it. See part II. b) abd c) in the BambooPT HOW TO.